Tuesday , 19 March 2024

RC18 Tuning – Camber Ballstud

RC18 Series Tuning - Camber Ballstud
Adjust the camber ballstud to change the roll center of your vehicle.
Camber Ballstud Height
You can change the front or rear roll center by raising or lowering the inner ballstud. A lower roll center (raising the ballstud) will put more weight on the tires during cornering, and increases traction to that end of the car.

Typically, .030″ shims are used to raise the ballstud. If this is too much, you can use thinner shims but be sure that you use the same thickness on both sides of the car.

Back to the 1/18th Scale Support Page