Home » New: RC Vehicles » ECX » ECX Torment SCT Brushless Edition

ECX Torment SCT Brushless Edition

ECX Torment SCT Brushless Edition

ECX Torment SCT Brushless Edition

In the world of full-sized motorsport, there are few arenas tougher than the American Short Course Truck (SCT) racing circuits. Full on throttle, fast-paced, body panel rubbing action is assured whenever the SCTs are in town. To survive in this arena, you need to be tough and powerful. Add in a little bit of crazy for good measure and you’re ready to hit the dirt.

The same applies in the world of Radio Control, which is why RC Short Course Trucks have become so popular, and which is why the ECX Torment has proven itself to be amongst the toughest and gnarliest of recreationally biased RC SCTs available today.

The ECX Torment BL takes off where the standard Torment leaves off – building upon the solid reputation, sheer strength and assured handling of its stable-mate by adding the phenomenally powerful Dynamite Tazer Brushless Power system to give the Torment BL real unlimited-class levels of power and performance.

Still 2WD, the Torment BL can light up its rear wheels with a snap of the throttle for tail-sliding, wheel-spinning fun whilst the high-lift chassis design helps ensure that the Torment BL won’t get snagged up unnecessarily when you’re tackling the badlands. The transmission is still protected by an adjustable slipper clutch that’s designed to help isolate impact loads but the transmission has been upgraded to handle the brushless power by fitting all-metal gears to the 3-gear reduction unit.

To make the most out of the powerful, 4-pole 3300Kv motor, the Waterproof ESC is powered by an uprated, 7-cell 8.4V NiMH battery – thus giving LiPo levels of performance whilst retaining the user-friendly chemistry of the Nickel based cell structure. Waterproof electronics, courtesy of Dynamite and Spektrum wrap up this powerhouse to provide all-weather action and the Torment BL is finished off with an attractively pre-finished styled SCT style of body shell that almost encourages a little bit of wheel banging and body rubbing – as after all, rubbin’s racing – right?

Specs:
Scale: 10th
Length: 508mm (20.0in)
Width: 295mm (11.6in)
Weight: 2.3kg (5.2 lbs)
Ground Clearance: 38.1mm (1.5 in)
Wheelbase: 333mm (13.1in)
Track: 292.1mm (11.5 in)
Chassis: Injection Molded Nylon Composite
Suspension: Independent
Shock Type: Oil-Filled
Drivetrain: 2wd
Differential: Gear
Wheel Type: Flat Black
Wheel Diameter: 3.0″ Inner diameter x 2.2″ Outer Diameter
Wheel Width: 40.8mm (1.6 in.)
Tyre Tread: Dynamite Speedtreads Shootout
Tyre Diameter: 109.2mm (4.3 in)
Motor Type: Non-Sensored Brushless
Motor Size: 540 3300kv
Pinion: 24T
Spur Gear: 87T
Gear Pitch: 48P
Internal Gear Ratio: 2.6:1
Radio: Spektrum DX2E 2 channel
Batteries: 8.4 volt 2400mah NiMh 7-cell flat pack with EC3
Charger: Dynamite 2.0amp
Ball Bearings: Full ball bearings

In The Box:
• Torment SCT
• 2.4GHz Radio System
• Speedpack 7-cell NiMH Battery
• 2A Peak Charger
• Decal Sheet
• AA transmitter batteries

Features:
• Speedtreads wheels and tires
• Oil Filled Shocks
• Ball Bearings
• Spektrum 2.4GHz DX2E radio system
• 7-cell Dynamite Speedpack 2400mAh NiMH battery
• Clipless Battery System
• Dynamite Tazer Waterproof, brushless ready-ESC
• Dynamite Tazer 3300kv sensorless brushless motor
• Adjustable slipper clutch
• Full metal gear transmission

[source: www.horizonhobby.co.uk]

My Zimbio

Leave a Reply