Saturday , 22 February 2020
Home » NEWS FEED » Axial Yeti Jr. Upgrade Parts | CompetitionX

Axial Yeti Jr. Upgrade Parts | CompetitionX

Axial Yeti Jr. Upgrade Parts | CompetitionX

Own an Axial Racing Yeti Jr.? If so then you’re going to love these new parts!

AXI31622 Axial Yeti Jr. Steering Knuckle Set
CNC’ed from 6061 aluminum and hard anodized, these replace the stock parts for increased strength

AXI31623 Axial Yeti Jr. C-Hub Carrier
CNC’ed from 6061 aluminum, hard anodized and includes kingpin bushings. Contains a left and right c-hub.

AXI31624 Axial Yeti Jr. Rear Axle Shafts
CNC’ed from 6061 aluminum and hard anodized. These rear axle shaft replace the stock parts and have an 8mm hub integrated into them.

AXI31625 Axial Yeti Jr. Front Axle Shafts
CNC’ed from 6061 aluminum and hard anodized, these front axles are 48.5mm long and a direct replacement for the stock plastic parts.

AXI31626 Axial Yeti Jr. Steering Rack
CNC’ed from 6061 aluminum and hard anodized. This package contains a 3-piece steering system to improve response and reduce flex.

AXI31627 Axial Yeti Jr. Steel Rear Driveline
This rear driveshaft is made from steel and replaces the stock part, allowing for more power to be used in the Jr.

AXI31628 Axial Yeti Jr. Aluminum Rear Locker
CNC’ed from 6061 aluminum and hard anodized, this locker replaces differential pieces in the rear end of the Jr., creating a zero-slip rear drivetrain.

All of these parts are upgrades to the stock parts, beefing up the durability as well as giving your mini Can-Am some definite bling!

For more information, please visit: www.axialracing.com

Check out more cool products from Axial.

Make sure you visit and subscribe to our YouTube Channel (CompetitionX YouTube) for up to date videos on all the current products!

Notice: Some of our articles, videos and descriptions may contain affiliate links, which means that if you click on one of the product links, we may receive a small commission. This helps support the website and social media channels and allows us to continue to produce content. Thank you for the support!

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 25 years. He has raced everything from 1:18th scale trucks to 1:5 scale motorcycles and everything in-between. He's also worked on both sides of the industry fence; working at and with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and has transferred that knowledge to CompetitionX - the most informative RC website on the internet! More articles by Tony Phalen

Check Also

Tekno RC EB410.2 4WD Buggy Build Part 7 – Shocks | CompetitionX

Tekno RC EB410.2 4WD Buggy Build Part 7 – Shocks | CompetitionX

Tekno’s EB410.2 uses a top-of-the-line set of big bore shocks. They include aluminum threaded bodies, …

Leave a Reply

Your email address will not be published. Required fields are marked *