The new Kyosho Scorpion XXL combines the dynamic off-road performance craved by off-road racers with easy drivability of a XXL scale off-road machine. The slow, typically lazy response of current big scale models make it more difficult to find suitable locations to race them. Kyosho creates a whole new and exciting reality for large scale fans, delivering a machine that’s slightly more compact, but features the explosive performance and lightning-quick reflexes of a finely-tuned racing machine. Completely new chassis design! The 3mm main chassis features a molded “perimeter” frame that results in rock-solid rigidity. In addition to providing superior suspension travel, the low shock mounting position of the front “gull” arms keeps the shocks as low as possible for maximum cornering speeds and exceptional stability over the roughest surfaces. This is complimented by a modern rear suspension typical of 1/10-scale race cars, strengthened to produce a robust suspension system for this big machine. The front suspension and steering geometry result in superior large-scale handling like never before.
• The receiver box is just the right size for the compact KR200 receiver. The mounting position is as far as possible from the electronics to reduce potential interference.
• Features hex type screws for secure assembly and sharp looks too.
• The molded front and rear shock towers feature ultra rigid construction for precision performance, while allowing just enough flex to maximize durability.
• Molded roll bar and roof can be installed with dummy fog lamps. Roll bar is already pre-installed on the Readyset.
• Includes a wing mount that allows installation of the rear wing from the Inferno MP9 (optional). Slight modification to wing is required.
• The in-line layout of the RC system including motor and battery adds increased agility for a larger scale model. The battery tray, with unique adjustable sliders, is compatible with various Orion batteries in the 2-4S range.
• Steel turnbuckle linkage rods included. Camber angle and toe angle can be quickly and easily adjusted by drivers looking to fine-tune performance
• The superior design of the front suspension results in less steering resistance, giving the Scorpion more “light” and responsive steering than is expected in a large scale machine.
• Rear hub carriers have plenty of thickness. 17mm aluminum wheel hubs are the same as those used on 1/8 buggies and trucks, greatly expanding the tire and wheel choices.
• The 2.4 GHz KT201 transmitter provides precision control and displays the settings for each function on the LCD screen such as EPA and ABS brakes. The KR200 receiver features a fail-safe setting, and a high torque KS203 servo with an aluminum case and metal gears is also included in the factory-assembled Scorpion XXL VE. Only batteries for the transmitter and 2 to 4S LiPo batteries are required to experience the powerful performance and pure excitement of big-scale off-road buggy racing.
Tread (F/R): 353 / 331mm
Tire(F/R): 130×43mm / 140×71mm
Gear Ratio: 16.0:1
Weight: 4000g with body
Motor: Orion Vortex 7 brushless
• Factory assembled chassis with 2-channel, 1-servo, 1-ESC R/C unit
• Syncro KT-201 transmitter
• Pre-painted body
• Pre-installed Team Orion VORTEX 7 brushless motor
• Pre-installed Team Orion VORTEX VE-XXL ESC
• Cross wrench
Required for Operation
• Battery for chassis/ 7.2-14.4V Li-Po battery with super plug connector
• Battery charger
• 4 x AA-size alkaline batteries for transmitter