Friday , 29 March 2024

RC4WD Mid-April 2017 Releases – 10 Great New Scale Products

RC4WD Mid-April 2017 Releases - 10 Great New Scale Products

RC4WD has announced 10 new great scale products through their mid-April 2017 press release. Let’s take a quick look at each of these:

RC4WD Tough Armor Winch Bumper with Stinger
The first item up is a heavy duty steel front bumper from Tough Armor. It is CNC-machined with the stinger bar hand welded for a perfect fit. Features include welded on tow shackles and an integrated fairlead mount. It is powder-coated in black and designed to fit the Axial SCX10 and SCX10 II.

RC4WD Trail Finder 2 “LWB” Chassis Set
Next up is a LWB (Long WheelBase) chassis set for the Trail Finder 2. This allows you to convert your original TF to a LWB version or, if you’re a custom builder, gives you the full chassis to build your own custom LWB rig. CNC-machined, it comes anodized black with all the cross-bracing and hardware.

RC4WD Low Profile Delrin Transfer Case Mount for the Trail Finder 2 and Trail Finder 2 LWB
Have a Trail Finder or Trail Finder 2 LWB? You’re going to love this new low-profile Delrin transfer case mount. It replaces the aluminum piece and gives the TF (or TF2) more ground clearance in the middle of the chassis to help clear obstacles. Comes in black and is a direct replacement part.

RC4WD K44 Ultimate Scale Cast Front Axle
RC4WD is proud of their new K44 axles, touting them as being the best reproduced parts to date. Designed from the ground up, they come assembled and feature die-cast zinc alloy housings, removable diff covers and 12mm hexes to mount your favorite wheels. They’re also include a 5mm output shaft and a 2.67:1 gear ratio, perfect for your next project.

RC4WD K44 Ultimate Scale Cast Rear Axle
Same features as the front above, only for the rear.

RC4WD Scale Signs Set
Want to trick out your trail with some custom signs? Well RC4WD has just made that a much easier task. Their sheet comes with both American and European versions of the stickers that can be attached to the included poles. These poles can be set on included stands for indoor use or stuck right in the ground for outdoor use.

RC4WD AA Batteries
Running a RC4WD rig that all tricked out with their parts? Why not throw some RC4WD Ultra Alkaline AAs into your radio as well! They have a voltage rating of 1.5V each and come in a pack of 4. Nice packaging as well!

RC4WD K44 Cast Steering Link Set
To go along with the K44 axles, RC4WD has released a full CNC-machined aluminum steering link set as well. Designed specifically for the K44 axle set, it is black anodized and comes with all the mounting hardware.

RC4WD Semi Rear Dump Bed 1.7″ Beadlock Wheels
Here’s some bad ass 1.7″ wheels for your RC4WD Semi Dump Bed! The are CNC-machined from zinc alloy complete with a brilliant silver finish. Their beadlock design ensures your tires never come loose. They have a 5.17mm offset and weigh 70.5g each. Available as a set of 4.

RC4WD 1:14 Scale Earth Digger 360L Cab Window Protective Screens
Protect the windscreens on your 1:14 scale Earth Digger 360L with these heavy duty stainless steel wire screens. They are sold as 2 screens – a large and a small – and are hand painted gray and are corrosion resistant. Mounting hardware is included.

Z-S1728 RC4WD Tough Armor Winch Bumper with Stinger
Z-C0053 RC4WD Trail Finder 2 “LWB” Chassis Set
Z-S1777 RC4WD Low Profile Delrin Transfer Case Mount for the Trail Finder 2 and Trail Finder 2 LWB
Z-A0101 RC4WD K44 Ultimate Scale Cast Front Axle
Z-A0096 RC4WD K44 Ultimate Scale Cast Rear Axle
Z-X0035 RC4WD Scale Signs Set
Z-S1718 RC4WD AA Batteries
Z-S1685 RC4WD K44 Cast Steering Link Set
VVV-S0184 RC4WD Semi Rear Dump Bed 1.7″ Beadlock Wheels
VVV-S0186 RC4WD 1:14 Scale Earth Digger 360L Cab Window Protective Screens

For more information, please visit: www.rc4wd.com

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 30 years. He has participated in every kind of surface racing events - 1/18 scale trucks, 1/10 scale TC, Rock Racers, Rally - if it had wheels, he's raced it! He's also worked on both sides of the industry fence; collaborating with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and is sharing that knowledge on CompetitionX - the most informative RC website on the internet!

Check Also

Video: Tamiyas Toyota Supra on the BT-01 Chassis - First Drive | CompetitionX

Video: Tamiya’s Toyota Supra on the BT-01 Chassis – First Drive | CompetitionX

There is alot of buzz surrounding the new BT-01 chassis from Tamiya. This is mainly …