New from ReVtech are 2 LiPo receiver packs designed especially for Nitro vehicles. Made with the highest quality cells, covered in extra heavy duty shrink and sporting 20awg leads, you will not find a better or more dependable receiver pack anywhere. Super light weight and designed to power the electronics of 1/10th & 1/8th scale gas powered race cars, as well as boats and some planes.
Racers have asked us for LiPo packs vs the LiFe so they have the higher voltage that some radio systems will allow you to run, providing higher torque and faster operating servos. This is a big advantage with the new heavier 1/10th and 1/8th vehicles. Each pack is kevlar wrapped and covered in heavy duty orange shrink. The packs have universal plugs for operation as well as a balance plug.
You will need a LiPo specific charger to charge the pack (NiMh or NiCd only chargers WILL NOT WORK). You must not over discharge the LiPoly battery pack. Be sure to read your chargers instructions for the correct settings.
Specs:
Capacity: 2500mAh
Nominal Voltage: 7.4v
LiPo Cell Arrangement: REV2105 2S1P, REV2106 2S2P
Discharge: 9C continuous, 18C max
Dimension: REV2105 85x30x17mm 88Gr. approx., REV2106 31x32x55mm 94 Gr. approx.
Connector: JR style with 20awg silicone wire
Recommended For: 1/10th and 1/8th scale vehicles, boats, helicoptors and planes
Part Number:
REV2105, 7.4v, 2500mAh LiPo Nitro Receiver Pack, Flat Style
Fits most vehicles.
REV2106, 7.4v, 2500mAh, LiPo Nitro Receiver Pack, Square/Hump Style
Direct RTR battery replacement, fits where hump pack fits. Universal style
Price: $49.99
[source: www.teamtrinity.com]
