pro-line Archives | CompetitionX
Wednesday , 12 December 2018

Tag Archives: pro-line

25 Days of CompetitionX-mas 2018 – Pro-Line’s Big ol’ Box of Stuff | CompetitionX

25 Days of CompetitionX-mas 2018 - Pro-Line's Big ol' Box of Stuff | CompetitionX

A big box of fun stuff showed up from Pro-Line Racing, so let’s get right to what was in it! The first prize up is Pro-Line’s PRO-MT 4×4 Roller Kit. This Monster Truck does come …

Read More »

SoCal U4RC Winter Series 2018 – Round 3 – Cherry Valley RC Raceway | CompetitionX

SoCal U4RC Winter Series 2018 - Round 3 - Cherry Valley RC Raceway | CompetitionX

Round 3 of the 2018 SoCal U4RC Winter Series had us back at Cherry Valley RC Raceway. Now, when we say Winter Series, you probably think cool weather, maybe even drizzle or snow. But this …

Read More »

Tekno ET410 Build – Part 9 – Final Assembly | CompetitionX

Tekno ET410 Build - Part 9 - Final Assembly | CompetitionX

The final steps in the Tekno ET410 are the wheels and tires, Velcro install and body. For the wheels and tires, I’m using: • #8262-03 Pro-Line Racing Positron T 2.2″, MC Compound, www.prolineracing.com • #7852 …

Read More »

Tekno ET410 Build – Part 8 – Electronics | CompetitionX

Tekno ET410 Build - Part 8 - Electronics | CompetitionX

Tekno’s ET410 will accept almost all 1:10 scale electronics, with some guys already installing 1:8 scale systems. I went with the same gear I used in my EB410 – simply because it worked, it’s fast …

Read More »

Tekno ET410 Build – Part 6 – Chassis Assembly | CompetitionX

Tekno ET410 Build - Part 6 - Chassis Assembly | CompetitionX

Now that we have the front and rear clips of our Tekno ET410 built, let’s start getting all the bits attached to the chassis. Speaking of the chassis, Tekno has provided the ET410 with a …

Read More »

Tekno ET410 Build – Part 5 – Front Suspension | CompetitionX

Tekno ET410 Build - Part 5 - Front Suspension | CompetitionX

Like the rear, the front suspension on the Tekno ET410 is quite macho. Thick parts, aluminum bits and another anti-roll bar – all standard equipment. Ok – done with the major build parts. Time to …

Read More »

Tekno ET410 Build – Part 3 – Rear Bulkhead | CompetitionX

Tekno ET410 Build - Part 3 - Rear Bulkhead | CompetitionX

In Step 3 of our Tekno ET410 build, we assemble the rear bulkhead; shock tower, camber link mount and body mounts. Another simple step. Both bulkheads are done, time to get the suspension mounted up!

Read More »

Tekno ET410 Build – Part 7 – Shocks | CompetitionX

Tekno ET410 Build - Part 7 - Shocks | CompetitionX

The Tekno ET410 comes with some pretty massive shocks – 13mm hard-anodized threaded shocks to be exact. In addition to their beefy design, they include 3.5mm shafts, dual glide x-ring cartridges and locking spring perches. …

Read More »

Tekno ET410 Build – Part 2 – Front Bulkhead | CompetitionX

Tekno ET410 Build - Part 2 - Front Bulkhead | CompetitionX

The next step in our Tekno ET410 build is the steering system and front bulkhead assembly. The ET410 uses a dual bellcrank steering setup that rides on a full set of bearings. The bulkheads are …

Read More »

Tekno ET410 Build – Part 4 – Rear Suspension | CompetitionX

Tekno ET410 Build - Part 4 - Rear Suspension | CompetitionX

The suspension on the Tekno ET410 is about as beefy as you can get on a 1:10 scale truck. Thick a-arms, aluminum arm mounts and a full set of anti-roll bars are all standard features, …

Read More »