sharkbait designworks Archives | CompetitionX
Friday , 19 April 2019

Tag Archives: sharkbait designworks

Tamiya TRF419XR Touring Car Build – Part 6 – Anti-Roll Bars | CompetitionX

Tamiya TRF419XR Touring Car Build - Part 6 - Anti-Roll Bars | CompetitionX

Like any good Touring Car, the Tamiya TRF419XR comes equipped with a front and rear anti-roll bar. I’m sure the kit bars work fine with additional bars available for tuning. Another quick and easy step …

Read More »

Tamiya TRF419XR Touring Car Build – Part 5 – Suspension | CompetitionX

Tamiya TRF419XR Touring Car Build - Part 5 - Suspension | CompetitionX

The suspension on the Tamiya TRF419XR has always been one of the best in the industry. Precision-molded arms, aluminum arm mounts and the super-slick TRF shocks all compliment this ride’s amazing drive quality. It even …

Read More »

Tamiya TRF419XR Touring Car Build – Part 4 – Steering | CompetitionX

Tamiya TRF419XR Touring Car Build - Part 4 - Steering | CompetitionX

The Tamiya TRF419XR uses a standard dual-bellcrank steering system. It is ball-raced and has aluminum turnbuckles reaching out to the wheels. Toe and Ackermann are adjustable. That was quick and easy. Moving on to Step …

Read More »

Tamiya TRF419XR Touring Car Build – Part 3 – Driveline | CompetitionX

Tamiya TRF419XR Touring Car Build - Part 3 - Driveline | CompetitionX

Time for the driveline. The Tamiya TRF419XR is a 4WD Touring Car, using a dual-belt setup to drive all 4 wheels. The center bulkhead houses a Tamiya-pitch spur gear – that’s fine and all, however …

Read More »

Tamiya TRF419XR Touring Car Build – Part 2 – Rear Differential | CompetitionX

Tamiya TRF419XR Touring Car Build - Part 2 - Rear Differential | CompetitionX

Like most current touring cars, the Tamiya TRF419XR comes with a front spool and rear gear differential setup. The rear is a sealed unit that accepts any diff fluids; we’ll be building ours with 3K …

Read More »

Tamiya TRF419XR Touring Car Build – Part 1 – Chassis Bulkheads | CompetitionX

Tamiya TRF419XR Touring Car Build - Part 1 - Chassis Bulkheads | CompetitionX

The Tamiya TRF419XR comes with a 2.25mm lower and 2mm upper deck as standard equipment. Both are machined from high-quality carbon fiber with blue-anodized aluminum parts bolted to it. In this step, we’re going to …

Read More »

Review: Tekno RC ET410 4WD 1:10 Scale Race Truggy | CompetitionX

Review: Tekno RC ET410 4WD 1:10 Scale Race Truggy | CompetitionX

RC Car Review: Tekno RC ET410 4WD 1:10 Scale Race Truggy Following in the footsteps of it’s younger sibling, Tekno RC’s ET410 4WD 1:10 Scale Racing Truggy has hit the offroad segment with a serious …

Read More »

SoCal U4RC Winter Series 2018 – Round 7 – Cherry Valley RC Raceway | CompetitionX

SoCal U4RC Winter Series 2018 - Round 7 - Cherry Valley RC Raceway | CompetitionX

The final round of the 2018 SoCal U4RC Winter Series has finally arrived with the top podium spot still up for grabs. With 2 throwouts available during this series, you could have 2 bad races …

Read More »

25 Days of CompetitionX-mas 2018 – Free Custom Paintjob – Sharkbait Designworks | CompetitionX

25 Days of CompetitionX-mas 2018 - Free Custom Paintjob - Sharkbait Designworks | CompetitionX

Stoked to have Sharkbait Designworks working with us again this year for the 25 Days of CompetitionX-mas! Matt, premier painter to the stars, is offering up a custom paintjob on a clear body! This guys …

Read More »

SoCal U4RC Winter Series 2018 – Round 3 – Cherry Valley RC Raceway | CompetitionX

SoCal U4RC Winter Series 2018 - Round 3 - Cherry Valley RC Raceway | CompetitionX

Round 3 of the 2018 SoCal U4RC Winter Series had us back at Cherry Valley RC Raceway. Now, when we say Winter Series, you probably think cool weather, maybe even drizzle or snow. But this …

Read More »