tekno Archives | CompetitionX
Thursday , 13 December 2018

Tag Archives: tekno

Tekno EB410 Build – Part 1 – Differentials

Tekno EB410 Build - Part 1 - Differentials

Tekno’s EB410 comes equipped with 3 high-quality fluid-filled gear differentials. The front and rear use steel gears while the center (spur gear) comes with a strong molded plastic gear. Clean up any excess fluid with …

Read More »

Tekno EB410 Build – Part 2 – Steering and Bulkheads

Tekno EB410 Build - Steering and Bulkheads

The next step in our Tekno EB410 build is the steering system and bulkhead assembly. The EB410 uses a dual bellcrank steering setup that rides on a full set of bearings. The bulkheads are designed …

Read More »

Tekno EB410 Build – Part 3 – Rear Suspension

Tekno EB410 Build - Rear Suspension

Tekno has us building the rear suspension next; hubs, suspension arms, arm mounts and rear anti-roll bar. Great job. Your rear bulkhead and suspension are now built and ready to be installed onto the chassis. …

Read More »

Tekno EB410 Build – Part 4 – Front Suspension

Tekno EB410 Build - Front Suspension

The next task in our Tekno EB410 build is the front suspension. This includes the steering knuckles, turnbuckles and extremely burly front suspension arms! Another fine job. Your front bulkhead and suspension is now built …

Read More »

Tekno EB410 Build – Part 5 – Chassis

Tekno EB410 Build - Part 5 - Chassis

In Part 5 of our Tekno EB410 build, we’ll be attaching assemblies to the beautiful chassis. This includes the front and rear clips, center diff and all the miscellaneous bits that hold these pieces together. …

Read More »

Tekno EB410 Build – Part 6 – Shocks

Tekno EB410 Build - Shocks

The shocks on the Tekno EB410 are fantastic. They use 13mm hard-anodized bodies, 3.5mm shafts and a unique x-ring cartridge that prevents leakage. Once built, these are some of the silkiest dampers on the market! …

Read More »

Tekno EB410 Build – Part 7 – Final Assembly

Tekno EB410 Build - Part 7 - Final Assembly

In this step of the Tekno EB410 build, we’ll be installing all the final parts to finish up the car; motor mount, steering links, velcro body mounting, etc. We won’t be showing the electronics just …

Read More »

Tekno RC EB48.4 E-Buggy Build – Part 7 – Body, Wheels and Tires

Tekno RC EB48.4 E-Buggy Build – Part 7 – Body, Wheels and Tires

The Build – Part 7 The final step in our Tekno RC build is to attach the body, wing, wheels and tires. The kit comes with a clear body and white wing, however not wheels …

Read More »

Tekno RC EB48.4 E-Buggy Build – Part 6 – Electronics

Tekno RC EB48.4 E-Buggy Build – Part 6 – Electronics

The Build – Part 6 Since the Tekno RC EB48.4 is a competition-level buggy, I get to put competition-level electronics in it! For this step we’ll be installing some gear from Futaba, ProTek RC, Tekin! …

Read More »

Tekno RC EB48.4 E-Buggy Build – Part 5 – Shocks

Tekno RC EB48.4 E-Buggy Build – Part 5 – Shocks

The Build – Part 5 Ok, time for some shock action! The Tekno RC EB48.4 comes with a stellar set of dampers. Everything on these shocks is new, from the bodies to the internals. Even …

Read More »