We showed you what comes in the WRC LM16-3 Prototype box, now let’s get to building this car! Since it’s a relatively easy build (being a pan car), we’re going to assemble the entire car in one sitting. From bags to a roller, we go through each step and give you tips where needed. The …

The post Video: WRC LM16-3 Prototype Online Build appeared first on CompetitionX.

Hello everyone and welcome to the final chapter in the Tekno NT48 2.0 Nitro Truggy Build. We wrap up the Truggy build with the electronics install, engine parts, steering and throttle linkages as well as the wheels, tires and body. At the time of this video, we didn’t have our engine yet so the build …

The post Video: Tekno NT48 2 0 Nitro Truggy Build – Part 4 appeared first on CompetitionX.

Welcome to Part 3 of the Tekno NT48 2.0 Nitro Truggy Build. This video is going to be short and sweet, working with the most important part of the Truggy’s suspension, the shocks! There’s nothing different to every other shock, but we decided to break it out into it’s own video to make it easy …

The post Video: Tekno NT48 2 0 Nitro Truggy Build – Part 3 appeared first on CompetitionX.

Welcome to Part 2 of the Tekno NT48 2.0 Nitro Truggy Build. In this video we’re diving in deep – the front and rear suspension, steering, anti-roll bars and getting all that on the chassis. This is a longer than normal video so take you time to ingest it – maybe grab a drink or …

The post Video: Tekno NT48 2 0 Nitro Truggy Build – Part 2 appeared first on CompetitionX.

Welcome to Part 1 of the Tekno NT48 2.0 Nitro Truggy Build. If you followed along with our ET48 2.0 Truggy build, I’m sure a lot of this is going to look familiar – the two Truggys use almost all the same parts. In this video, we go over the tools we suggest for a …

The post Video: Tekno NT48 2 0 Nitro Truggy Build – Part 1 appeared first on CompetitionX.

Welcome back to Part 4 and the final installment to Tamiya’s XV-02 Pro Rally video build. We wrap up this Series with the shock assembly, installing the rest of the electronics (ESC, servo and receiver), some final assembly parts and the wheels, tires, inner dust shield and body set. For this build we are using …

The post Video: Tamiya XV-02 Pro Build Video – Part 4 appeared first on CompetitionX.

Thanks everyone for tuning in to Part 3 of the Tamiya XV-02 Pro online video build. In this video we continue the suspension assembly with the caster blocks, rear hubs, shock towers and CVDs. We also drop in the motor and show you the best way to set the gear mesh. Our new CompetitionX Ball …

The post Video: Tamiya XV-02 Pro Build Video – Part 3 appeared first on CompetitionX.

Welcome to Part 2 of our Tamiya XV-02 Pro Online Build Video Series. In this video, we dive deeper into the XV-02 build – assembly of the lower suspension parts, arm mounts and center drivetrain. We also chat about gearing options and offer a few tips on building this part of the car. Thanks for …

The post Video: Tamiya XV-02 Pro Build Video – Part 2 appeared first on CompetitionX.

Welcome everyone to our Tamiya XV-02 Pro Online Build Video Series. In this video, Part 1, we start the build process with an intro regarding the tools we suggest you have to make the build extremely enjoyable. We also chat a bit about the manual before we get into the actual build steps – the …

The post Video: Tamiya XV-02 Pro Build Video – Part 1 appeared first on CompetitionX.

We are happy to bring you the unboxing video of the Tamiya XV-02 Pro Rally car. This is Tamiya’s latest and greatest 1/10 scale Rally car complete with a new tub chassis layout, centralized motor, front and rear gear diffs, 4-wheel independent long-travel suspension and some awesome aluminum Pro-level shocks! In this video, we yank …

The post Video: Tamiya XV-02 Pro Rally Car Unboxing appeared first on CompetitionX.