AVID RC has come out with a set of 12mm clamping hexes for use with the Team Associated B6/B6D. These hexes are machined from 6061-T6 aluminum and feature chamfering for lighter weight and easy installation. They are a direct fit on AE’s 6-series, are 7mm wide and have a 2-56 stainless screw to keep them …

The post AVID RC Clamping 12mm Hex for the Team Associated B6 / B6D appeared first on CompetitionX.

AVID RC has released titanium ballstuds in two popular sizes; 5.5mm for Team Associated B5/B5M/SC104x4 and 4.9mm for the XRay T4/XB4. Designed to be super strong AND save weight (roughly 40% over their steel counterparts), these ballstuds are a win/win for you racers looking for every advantage. These titanium ballstuds are machined from 6AI-4V billet …

The post Get Your AVID RC Titanium Balls, Stud appeared first on CompetitionX.

Durango DEX210, DEST210R, and DESC210R owners can now run the famous AVID Triad Slipper Clutch on the entire Durango 2wd lineup. AVID custom designed a custom topshaft, drive plate, and gear cover to mate with existing Durango parts so that racers can experience the incredible throttle feel , low rotating weight, and long life of …

The post AVID RC Triad Upgrade Pack for Team Durango appeared first on CompetitionX.

Fear not the thermal assault on your SCTE’s motor. FTW’s cooling fan kit can lower motor temps by up to 40 degrees versus no fan. Our made-in-the-USA carbon fiber bracket bolts on in place of the center diff brace and suspends a massive 40mm cooling fan over the motor can. Expect side effects like increased …

The post AVID RC FTW Fan Kit for the Losi TEN-SCTE appeared first on CompetitionX.

Upgrade your SC10 FT or SC10 RTR to use 12mm hex wheels with the pre-assembled AVID SC10 12mm Hex Conversion Kit. Using genuine Team Associated steering blocks and front axles, AVID pre-assembled the steering blocks with our 12mm front clamping hex adapters, Revolution bearings, and solid axle pins. No more hunting around for all the …

The post AVID RC SC10 12mm Hex Conversion Kit appeared first on CompetitionX.

Team Associated buggy and truck owners can upgrade to big-bore 12mm shock springs using these new spring collar adapters. These simple and inexpensive adapters will give your car or truck a clean and professional look. Features are: • Collar Adapters slide directly over the existing shock collar and secure with a set screw. Installation only …

The post AVID RC Spring Collar Adapters for AE B4.1, B44.1, T4.1 and SC10 appeared first on CompetitionX.

From time to time I stop by my local tracks to see if I can spot anything the manufacturers might be ‘testing out’. Sometimes you get lucky, sometimes you don’t. Last night I rolled up into West Coast RC Raceway, one of the premier indoor off-road facilities in SoCal. Sitting at the back of the …

The post New Products From Avid RC appeared first on CompetitionX.