RPM RC Products had molded up a set of front suspension arms for the Team Associated B6 / B6D 2WD buggy. These, however, are not your normal straight arms but instead the ‘gull wing’ parts used on higher grip carpet and turf applications. In addition, RPM has tightened up the tolerances in the hinge pin …

The post RPM Gull Wing Front Suspension Arms for the Team Associated B6 / B6D appeared first on CompetitionX.

Having issues with the front suspension arms on your Team Associated B6 or B6D breaking? Don’t change your driving style – replace those front arms with a new set from RPM RC Products! Yup, RPM has fabricated a set of new front suspension arms for you B6 (B6D) made from their super strong grade of …

The post RPM Flat Front Suspension Arms for the Team Associated B6 / B6D appeared first on CompetitionX.

If you’ve got a Team Associated B6 or B6D and crashing is something you’re good at, you might want to check these two new bumpers from RPM RC Products; a mini and a wide front bumper. Both of these bumpers are made from RPM’s durable blend of lightweight plastic with 4 mounting holes to ensure …

The post RPM Wide and Mini Front Bumpers for the Team Associated B6 / B6D appeared first on CompetitionX.

If you’re running a 3-gear laydown transmission setup in your Team Associated B6 and not sporting a gear cover, chances are you could be in for trouble if you crash (or someone crashes into you) and comes in contact with your spur gear. That’s where JConcepts comes in. Their new motor plate is milled from …

The post JConcepts 3-Gear Honeycomb Motor Plate and Shield for the Team Associated B6 appeared first on CompetitionX.

JConcepts has been beefing up their Shapeways Store; this time with two new battery braces for the Team Associated B6 buggies. The first brace is designed to work with the Reedy Zapper 5400mAh shorty, holding it snugly to the chassis while still allowing the use of the original thumbscrews. The entire system has a nice, …

The post JConcepts Battery Brace for the Team Associated B6 Series – Two Versions appeared first on CompetitionX.

AVID RC has come out with a set of 12mm clamping hexes for use with the Team Associated B6/B6D. These hexes are machined from 6061-T6 aluminum and feature chamfering for lighter weight and easy installation. They are a direct fit on AE’s 6-series, are 7mm wide and have a 2-56 stainless screw to keep them …

The post AVID RC Clamping 12mm Hex for the Team Associated B6 / B6D appeared first on CompetitionX.

The Team Associated B6/B6D comes with a piece called the waterfall; it’s the curved brace that connects the transmission to the chassis. The original piece helps keep the chassis solid but after quite a bit of feedback, racers find that it’s a bit stiff for certain situations. That’s where JConcepts comes in. They’ve released a …

The post JConcepts Elephant Truck-Style Waterfall for the Team Associated B6 / B6D appeared first on CompetitionX.

I recently installed the laydown transmission in my B6D and found the car to be extremely aggressive. While I’m ok with that, it basically took eliminated all the work I’ve done fine tuning my setup. Schelle Racing has a fix for this; by removing the stock plastic waterfall brace and replacing it with a tie …

The post Schelle Racing Carbon X-Plate and Chassis Tie Rod Set for the Team Associated B6 appeared first on CompetitionX.

Looking for some upgrade carbon fiber for your Team Associated B6 or B6D? Well JConcepts has just the thing for you! Included in the carbon fiber release shock tower designed to work with AE’s flat front arms. The tower is 4mm thick and features milled sections to keep the weight down. Countersunk screw holes are …

The post JConcepts Carbon Fiber Parts for the Team Associated B6 / B6D appeared first on CompetitionX.

The laydown transmission in the Team Associated B6 buggy is a great addition to the performance of the car – the only downside is there’s no gear cover to protect the spur gear. Schelle Racing has remedied that by designing a new, 3D printed cover that attaches to their new aluminum motor plate keeping the …

The post Schelle Racing Laydown Motor Plate and Spur Guard for the Team Associated B6 appeared first on CompetitionX.