Performance Parts for Your ECX Ruckus 2WD Monster Truck For this installment of Hop Up Corner, we’re going to check out some of the best upgrades for your ECX Ruckus 2WD Monster Truck. This is a fun truck that is itching for some upgrades – we’re converting it from a fast-moving 2WD MT to a …

The post Hop Up Corner: ECX Ruckus 2WD Monster Truck appeared first on CompetitionX.

Following the release of the new rear bumper for the ECX Torment 4×4, RPM also has a new rear skid plate for both the Torment and Circuit 4×4 trucks. This skid plate extends roughly 2mm down past the chassis and adds protection to the bottom of the chassis at the rear, absorbing any hard impacts …

The post RPM Rear Skid Plate for the ECX Circuit 4×4 and Torment 4×4 appeared first on CompetitionX.

RPM has released a new rear bumper for your ECX Torment 4×4 that mimics that of a real offroad, tube-style rear bumper. Not only that, this new piece increases durability at the rear of the truck and also allows the installation of RPM’s Low Visibility Wheelie Bar Kit and Mud Flap and Number Plate Kit. …

The post RPM Rear Bumper for the ECX Torment 4×4 appeared first on CompetitionX.

RPM has a cool new front bumper for those of you that own an ECX Torment 4×4. This front bumper is rock solid and immediately improves the durability of the truck, something Torment owners have had some problems with. This bumper mounts using 4 screws (over the stock 2-screw setup) and includes a front brace …

The post RPM Front Bumper for the ECX Torment 4×4 appeared first on CompetitionX.

RPM has released a new bellcrank for ECX vehicles that replaces the sloppy, wandering system with one that eliminates the servo saver. This steering setup features a rock-solid servo-to-turnbuckle system, similar to what most high-end race cars use. RPM states this setup allows perfect tracking of the steering as well as beefs up the system …

The post RPM Servo Saver Eliminator Bellcrank for ECX Vehicles appeared first on CompetitionX.

RPM now offers Heavy Duty Caster Blocks to increase the durability in some of the more popular ECX vehicles including the Boost, 2WD Circuit, 2WD Ruckus and 2WD Torment. Made from their special blend of nylons, these blocks have increased wall thickness to help prevent breakage up to 20%. If you’re having some issues with …

The post RPM Offer HD Caster Blocks for the ECX Lineup appeared first on CompetitionX.

RPM has been molding suspension bits for all the popular vehicles for quite some time, and now it’s time to rejoice for all of you ECX Torment, Ruckus & Circuit owners! That’s right, RPM has included you in their lineup with the addition of their uber-strong front suspensions arms! These new suspension arms are stronger, …

The post RPM Front Suspension Arms for the ECX Torment, Ruckus, Circuit appeared first on CompetitionX.

With the arrival of all new ECX® 1/10-scale vehicles, including the Circuit™ Stadium Truck, Ruckus® Monster Truck, Boost™ Buggy and Torment™ SCT, each will receive updated trim schemes and Spektrum™ 2.4GHz radio systems (DX2E transmitter and SR201 receiver). Each vehicle in the 1/10-scale lineup will continue to communicate the value proposition that has made the …

The post Updated ECX Circuit ST, Ruckus MT, Boost Buggy and Torment SCT appeared first on CompetitionX.

The Xtreme Racing Frame Extentions can be used in one of 3 configurations: • To extend the wheelbase of the ECX Circuit Stadium Truck • To extend the wheelbase of the ECX Boost Off Road Buggy • To turn the ECX Torment into an LCG Race Truck Please note, the following ECX Parts are required …

The post Xtreme Racing Frame Extensions – ECX Stadium Truck and Boost Buggy appeared first on CompetitionX.

Whether you’re ripping through the dirt, roasting the pavement or destroying your living room, the 1/18-scale Smash monster truck delivers. It can take a beating without breaking a sweat. Thanks to powerful Dynamite electronics, this truck will blast through the neighborhood with intense speed and quick acceleration. The Smash was built from the ground up …

The post ECX Smash 1/18th Monster Truck appeared first on CompetitionX.