The title says it all – the full build video! We take a box full of parts and turn it into a running Tekno SCT410 2.0 Short Course truck! In addition to our normal build, we give you tips on some of the more tricky parts of the build (there’s really only a few). We …

The post Video: Tekno RC SCT410 2.0 Short Course Truck Build | CompetitionX appeared first on CompetitionX.

We showed you what comes in the WRC LM16-3 Prototype box, now let’s get to building this car! Since it’s a relatively easy build (being a pan car), we’re going to assemble the entire car in one sitting. From bags to a roller, we go through each step and give you tips where needed. The …

The post Video: WRC LM16-3 Prototype Online Build appeared first on CompetitionX.

Thanks everyone for tuning in to Part 3 of the Tamiya XV-02 Pro online video build. In this video we continue the suspension assembly with the caster blocks, rear hubs, shock towers and CVDs. We also drop in the motor and show you the best way to set the gear mesh. Our new CompetitionX Ball …

The post Video: Tamiya XV-02 Pro Build Video – Part 3 appeared first on CompetitionX.

Installing the electronic and assembling the wheels and tires, driver, rear wing and body.

The post Video – Tamiya Astute 2022 Build Part 3 | CompetitionX appeared first on CompetitionX.

Suggested tools, electronics package and assembly of the front front suspension and shocks

The post Video – Tamiya Wild One Blockhead Motors Build Part 1 | CompetitionX appeared first on CompetitionX.

Welcome everyone to Part 5, the final chapter in the Tamiya Super Avante video build series. In this video we’re installing the electronics, wheels and tires, rear wing and the body. We have to say that this was certainly one of the more unique and fun builds we’ve done from Tamiya and we’re super excited …

The post Video – Tamiya Super Avante Build Part 5 | CompetitionX appeared first on CompetitionX.

Welcome everyone to Part 4 of the Tamiya Super Avante online video build. In this video we’re wrapping up the front end, installing the shocks, shock tray and the rest of the front suspension. This gets the Super Avante to ‘almost’ running status – the next video should wrap up the entire build with the …

The post Video – Tamiya Super Avante Build Part 4 | CompetitionX appeared first on CompetitionX.

Hey everyone and thanks for tuning in to Part 3 of the Tamiya Super Avante online video build. In this video we’ll be assembling and installing the front gearbox, steering system, center driveshaft and front bumper. This video gets us one step closer to the completion of the Super Avante – only the front shocks, …

The post Video – Tamiya Super Avante Build Part 3 | CompetitionX appeared first on CompetitionX.

Welcome to Part 2 of the Tamiya Super Avante online video build. In this video we continue with the rear end of the car, assembling and installing the rear shocks, battery tray and servo. Note that the Super Avante does require a low-profile servo, something I thankfully had lying around. I do show the install …

The post Video – Tamiya Super Avante Build Part 2 | CompetitionX appeared first on CompetitionX.

Welcome to Part 1 of the Tamiya Super Avante online video build. The Super Avante is the 2021 version of the original Avante released back in 1988. Features include a shaft-drive 4WD system, inboard front shocks, 4-wheel independent suspension, ball differentials and even a driver figure! In this video we go over the tools you’ll …

The post Video – Tamiya Super Avante Build Part 1 | CompetitionX appeared first on CompetitionX.