Pulling maximum performance from you crawling rig means you sometimes have to look outside the box. RC Upgrade has done just that with this new flat skid plate for your Axial SCX10 and SCX10 II! This skid plate replaces the stock piece and makes the bottom of your truck perfectly flat, optimizing ground clearance. It …

The post RC Upgrade Flat Skid Plate – Axial SCX10 / SCX10 II | CompetitionX appeared first on CompetitionX.

Give your Axial SCX10 XJ that super scale underwater ability with this officially licensed Safari Snorkel from RC4WD! This snorkel is molded from ABS plastic and comes pre-assembled – all you need to do is drill a pair of mounting holes and screw it in place (using the included self-tapping M1.6×5 screws). Designed to fit …

The post RC4WD Safari Snorkel for the Axial SCX10 XJ appeared first on CompetitionX.

There are quite a few upgrades already out there for Axial’s SCX10 II, but this has to be one of the most peculiar ones we’ve seen in awhile. Now, I say peculiar in a good way; it’s something different which makes it a good ‘peculiar’. Check out this rear cantilever suspension setup from Dinky RC. …

The post Dinky RC Cantilever Suspension Kit for the Axial SCX10 appeared first on CompetitionX.

Integy wants to up your Axial SCX10’s cool factor by adding a carbon fiber battery tray. It’s design allows you to mount it transversely (or across the frame rails), allowing you more freedom for electronics over the front axle. The tray comes with carbon plates, alloy mounting braces and battery holders and Velcro release straps. …

The post Integy Carbon Fiber Battery Tray for the Axial SCX10 appeared first on CompetitionX.

Looking to customize your Axial SCX10 with something quite unique? Then check out Integy’s Steel Ladder Frame Chassis Kit! This kit come with all the parts to build the steel ladder frame chassis setup as well as a host of billet-machined option parts; shock mounting hoops, chassis braces and bumper mounts, center skid, battery tray, …

The post Integy Steel Ladder Frame Chassis Kit for the Axial SCX10 appeared first on CompetitionX.

Axial SCX10 owners can now add a bit of color as well as a little more weight to the front of their rigs with these new Integy Metal Receiver Boxes. These alloy boxes replace the stock plastic parts and are available in blue, black, gunmetal, orange and red. They are also slightly heavier to help …

The post Integy Metal Receiver Box for the Axial SCX10 appeared first on CompetitionX.

STRC has released some new CNC-machined parts for the Axial SCX10 trail truck. These parts include an front bumper mount, rear chassis brace and rear chassis brace with light buckets. All of these parts are direct replacements for the stock, plastic pieces. They add both style and strength to your SCX10 and utilize the stock …

The post Team STRC CNC-Machined Chassis Parts for the Axial SCX10 appeared first on CompetitionX.

Scale Trail Toy for the Axial West Coast Challenge 2011 Back in 2011, I was invited to attend Axial West Coast Challenge (AWCC) in Cisco Grove, California. I was there to both cover the event (I was working for RC Driver Magazine at the time) as well as participate in the activities; rock crawling (with …

The post Project: Axial Scale Trail Truck – SCX10 Custom Build appeared first on CompetitionX.

Beef up the drivetrain of your Axial SCX10 trucks with the addition of MIP’s C2 X-Duty CVD Spline Drive Kit. This kit targets all SCX10 owners and features high-grade, steel alloy spline driveshafts that have been heat-treated for extreme durability. The kit includes front and rear driveshafts that extend from the center transmission to the …

The post MIP X-Duty CVD Spline Drive Kits for Axial SCX10 Trucks appeared first on CompetitionX.

While it works very well, Axial’s axle-mounted steering servo isn’t exactly scale. Time to move it to the chassis, and you can do that with STRC’s new aluminum servo mount kit. But wait – not only are you relocating the servo, this kit also includes a Panhard setup! Included in this kit are a pair …

The post STRC CNC-Machined Aluminum Servo-Mount / Panhard Combo for the Axial SCX10 appeared first on CompetitionX.