The Build – Part 8 The final step to the Speed Passion LM-1 LeMans involves installing the electronics and the absolutely stunning LM-1 body. Big props to Brad Palmer at F1 RC Labs for his amazing paint work! Build Notes: The body contains multiple pieces, making it a bit difficult to mount after assembly. Before …

The post Speed Passion LM-1 LeMans Build – Part 8 – Electronics and Body appeared first on CompetitionX.

The Build – Part 7 In this step we attach the tire/wheels to the car as well as the body mounts. We also top the LM-1 off with one of the most amazing bodies I’ve ever seen. Thanks to Brad Palmer over at F1 RC Lab for the extraordinary paint work. Build Notes: Nothing odd …

The post Speed Passion LM-1 LeMans Build – Part 7 – Body Mounts, Wheels and Tires appeared first on CompetitionX.

The Build – Part 6 Time to build the center shock. We’ll also be attaching the upper deck in this step as well. Build Notes: Since we’ll be building the center shock at this time, have a few clean rags available in case of any spills. Start off by installing the o-ring into the spring …

The post Speed Passion LM-1 LeMans Build – Part 6 – Center Shock appeared first on CompetitionX.

The Build – Part 5 This step is a short one and involves assembling the rear suspension; basically the rear damper, side springs and center shock mount. Build Notes: The side springs are a little bit delicate, so take care when attaching them to the side spring retainers. You don’t want to ‘skew’ them or …

The post Speed Passion LM-1 LeMans Build – Part 5 – Rear Suspension appeared first on CompetitionX.

The Build – Part 4 If Part 4 of the LM-1 build, we assemble and attach the front end. It’s a simple, double a-arm setup that features a pillow-ball upper arm for quick and easy camber adjustments. Build Notes: Threadlock will be needed in a few of these steps, so have some ready! Pre-compress the …

The post Speed Passion LM-1 LeMans Build – Part 4 – Front Suspension appeared first on CompetitionX.

The Build – Part 3 The LM-1 uses a unique dual-bellcrank steering system, a setup found mostly in offroad and touring cars. This setup makes the steering feel (and react) a bit differently than a direct-setup and I’m actually loving it. Build Notes: When attaching the lower front arms to the chassis, pay attention to …

The post Speed Passion LM-1 LeMans Build – Part 3 – Steering appeared first on CompetitionX.

The Build – Part 2 The next step of our Speed Passion LM-1 LeMans build is the assembly of the rear axle. We’ll also be assembling the differential as well. Build Notes: While not the norm, we do have to build the ENTIRE rear axle, which means pinning the inner diff hub to the chassis. …

The post Speed Passion LM-1 LeMans Build – Part 2 – Rear Axle appeared first on CompetitionX.

The Build – Part 1 Speed Passion LM-1 LeMans Build – Part 1 – Rear Pod – this first Part of the build involves assembling the rear pod, side links and attaching that assembly to the main chassis. Build Notes: Even though the instructions tell you what bag you need to open for each step, …

The post Speed Passion LM-1 LeMans Build – Part 1 – Rear Pod appeared first on CompetitionX.

Speed Passion LM-1 LeMans Build – The rise of RC Formula 1 has put a huge resurgence in Pan Car racing all across the country. Organizations like the UF1 have created a format that has put a ton of excitement back into 1/10 scale Pan Cars, but the true foam-tired, enclosed-bodied Pan Cars of yesteryear …

The post Speed Passion LM-1 LeMans Build appeared first on CompetitionX.