The Build – Part 6 The final step in the TA06 Pro build is the body. Because I chose to use Tamiya’s IFS front end, this opened the door to some other bodies that I could not previously use. I went with the Honda HSV simply because it looks awesome and is very aerodynamic. This …

The post Tamiya TA06 Pro Build – Part 6 – The Body appeared first on CompetitionX.

The Build – Part 5 Part 5 of the TA06 Pro build includes mounting the tires, front bumper, body mounts and the battery. Part 5 should be pretty straightforward and allow you the time for your tires to completely glue in place. Build Notes: Your front foam bumper may need to be trimmed depending on …

The post Tamiya TA06 Pro Build – Part 5 – Wheels, Tires and Bumper appeared first on CompetitionX.

The Build – Part 4 For the third installment of the TA06 Pro Build we will be focusing on the front and rear suspension systems. The TA06 Pro uses the standard lower suspension arm/upper turnbuckle The fourth installment in the TA06 Pro build revolves around the shocks and electronics. Thankfully, the Tamiya shocks are some …

The post Tamiya TA06 Pro Build – Part 4 – Shocks and Electronics appeared first on CompetitionX.

The Build – Part 3 For the third installment of the TA06 Pro Build we will be focusing on the front and rear suspension systems. The TA06 Pro uses the standard lower suspension arm/upper turnbuckle design. This is a proven design that also makes tuning and adjustment very easy. Build Notes: You will be greasing …

The post Tamiya TA06 Pro Build – Part 3 – Front/Rear Suspension appeared first on CompetitionX.

The Build – Part 2 The second part of the build will focus on installing the rear gearbox, belt drive and steering system. Pretty simple and straightforward, but there are a few key places to pay attention to. Build Notes: Make sure you trim ALL the flashing off all of the parts you take off …

The post Tamiya TA06 Pro Build – Part 2 – Gearbox/Steering appeared first on CompetitionX.

For the next week or so, I will be doing a pro-buildup of Tamiya’s hot new TC, the TA06 Pro. Not only are we going to take you step-by-step (almost) through the build, but I will also be installing some of the latest TA06 Pro hop-ups. The end result should be a pretty sick TC …

The post Tamiya TA06 Pro Build – Part 1 – Transmission appeared first on CompetitionX.

Tamiya recently sent me one of their new TA06 Pro kits with some extra parts to review. You can find the full, step-by-step build up right here on CompetitionX. Follow along to see the TA06 Pro come to life. Testing and my final thoughts will be posted in an upcoming review. The following Tamiya Option …

The post Tamiya TA06 Pro Build | CompetitionX appeared first on CompetitionX.