The Build – Part 10 In Part 10 we finish up our Losi 22SCT build; the body, the wheels and the tires. Four quick steps…let’s get to it! Build Notes: You’ll be using CA glue to bond the tires to the wheels. Be VERY careful with this glue; it bonds fingers to objects just as …

The post TLR 22SCT Build – Part 10 – Body, Wheels and Tires appeared first on CompetitionX.

The Build – Part 9 Part 9 is a set of short steps as well. We’re installing the electronics, however the manual doesn’t go into detail about where to mount the ESC or receiver. I’m installing them in the most common locations but this is really up to you. Build Notes: None. The ESC typically …

The post TLR 22SCT Build – Part 9 – Electronics appeared first on CompetitionX.

The Build – Part 8 Part 8 is a short step; we’re basically bolting on the miscellaneous chassis bits prior to final assembly. Pretty easy. Build Notes: None. Start off by sliding the body posts down into the front body mount and pin them in place with the 12mm screw. Slide the swivel mounts over …

The post TLR 22SCT Build – Part 8 – Additional Chassis Parts appeared first on CompetitionX.

The Build – Part 7 The shocks (or dampers) on any car, onroad or off, are probably the most important, and overlooked, parts of the car. Built correctly, they will give you a distinct advantage over those that don’t take the extra time to do so. Take your time here and do it right. Build …

The post TLR 22SCT Build – Part 7 – Shocks appeared first on CompetitionX.

The Build – Part 6 The next step in our TLR 22SCT build is attaching the transmission and rear bumper to the chassis assembly. Again, we are building the 22SCT in the RR (Rear Motor) design so your steps for MM (Mid Motor) will be different. Build Notes: The instructions tell you to install the …

The post TLR 22SCT Build – Part 6 – Rear Bumper appeared first on CompetitionX.

The Build – Part 5 In Part 5, I’ll be assembling the transmission of the TLR 22SCT. Although we have the option to build it as a MM (Mid Motor), I’ve opted to build it as a RM (Rear Motor) layout. That’s the most popular at my local track. Build Notes: I’ll be working with …

The post TLR 22SCT Build – Part 5 – Transmission appeared first on CompetitionX.

The Build – Part 4 Part 4 of the TLR 22SCT build includes the rear suspension and rear shock tower. Carry on. Build Notes: Since you’ll be building the rear drive shafts in this step, you’ll want to make sure to have some clean rags around to clean up any spare grease. You will need …

The post TLR 22SCT Build – Part 4 – Rear Suspension appeared first on CompetitionX.

The Build – Part 3 The front suspension is up next, which includes turnbuckles, suspension arms, the shock tower and front bumper. Build Notes: You’ll be building turnbuckles in this step…never any fun. Have a few rags around to hold the ballcups or, if you have some, grab your ballcup holding tool. Part 3 of …

The post TLR 22SCT Build – Part 3 – Front Suspension appeared first on CompetitionX.

The Build – Part 2 Part 2 of our build revolves around the steering system and front bulkhead of the 22SCT. The steering is quite unique, utilizing a sliding rack design. It attaches to the upper plate and can be removed as one piece for maintenance. Build Notes: None! Simple, straightforward step. We start the …

The post TLR 22SCT Build – Part 2 – Front Bulkhead appeared first on CompetitionX.

The Build – Part 1 The 22SCT is a pretty free-flowing build. Up front it has us installing the servo and steering rack, so let’s get started. Build Notes: Pay attention to the servo chart on page 12. This will help you decide which shims you will need in order to correctly space your servo. …

The post TLR 22SCT Build – Part 1 – Servo Install appeared first on CompetitionX.