Team Losi Racing has released a new 3-gear conversion kit for their 22-series. This kit updates the 22 2.0, 22T 2.0 or 22SCT 2.0 mid-motor rides to a 3-gear transmission, a setup designed to be much more efficient for stock and spec racing. This kit comes with a 3-gear transmission case, front and rear braces …

The post TLR 3-Gear Transmission Conversion Kit for the 22-Series appeared first on CompetitionX.

Exotek has another cool part for all of you looking to lighten up your Losi 22 3.0 buggies. The ‘Flite’ Titanium Axles are machined to a 12mm hex, drilled to reduce weight and rounded for a easy, clean fit. They weigh in at only 3.25g a pair, nearly half the weight of the stock axles. …

The post Exotek Flite Titanium Axles for the Losi 22 3.0 Buggy appeared first on CompetitionX.

A couple weeks ago we brought you a sneak peek photo of a LCG laydown conversion gearbox that Exotek has in the works for the Losi 22 3.0. Well, it’s finally here complete with a whole lot of photos – and it looks awesome! The outer shell is a machined aluminum case that aligns the …

The post Exotek LCG Laydown Gearbox Conversion for the Losi 22 3.0 appeared first on CompetitionX.

If you’re looking to lighten up your Team Associated B5M or TLR 22 3.0, you might want to check out Schelle Racing’s vented motor plate. This plate is machined from aluminum and features vented slits on the backside to aid in airflow. The best part – these motor plates weigh in at a measly 12.96g …

The post Schelle Racing Vented Motor Plate for the Team Associated B5M and TLR 22 3.0 appeared first on CompetitionX.

Reduce weight where it counts with JConcepts’ new titanium front axles for your TLR 22 3.0. These axles are a direct replacement for the stock parts and change over from the stock screw-type to a 4mm lock-nut securing system. These axles are compatible with the stock TLR hex. #2541 JConcepts Titanium Front Axles for the …

The post JConcepts Titanium Front Axles for the TLR 22 3.0 appeared first on CompetitionX.

With the IFMAR Worlds being run on carpet, we’ve been seeing quite a few turf-tracks popping up. With that, alot of low CG, laydown gearbox designs have been popping up as well. Exotek, a definite leader in quality aftermarket parts for all kinds of race rides, has released a single pic of their new LCG …

The post Exotek LCG Laydown Gear Box Conversion for the TLR 22 3.0 appeared first on CompetitionX.

TLR has a new Direct Drive System for the 22-series buggies that replaces the heavy slipper assembly. This system is designed for stock racing where less weight and low rotating mass is extremely beneficial. This system includes a new aluminum upper shaft, aluminum spur gear adapter and two different 48P spur gears. The spur gears …

The post TLR 22 Direct Drive System appeared first on CompetitionX.

Save weight and look great with Schelle Racing’s new titanium screw set for the TLR 22 3.0. This 37-piece screw kit is made from Grade 5 Titanium Alloy, shaves 12grams of weight and includes a complete set of replacement screws (except the chassis bottom screws). Designed for the mid-motor TLR 22 3.0. SCH1118 Schelle Racing …

The post Schelle Racing Titanium Screw Set for the TLR 22 3.0 appeared first on CompetitionX.

TLR has updated their 22 buggy to the 3.0 status, adding a few new features as well as a revised chassis to keep this MM fighter a versatile track contender. Starting with the chassis, the TLR team has widened the chassis 2.5mm from the previous model, allowing the use of a traverse battery mounting option, …

The post TLR 22 3.0 2WD MM Buggy appeared first on CompetitionX.

Schelle Racing now offers a titanium screw kit for the TLR 22 2.0 Mid-motor buggy. This kit contains 40 Ti screws that replace the kits heavier, steel screws, but only in strategic areas high up on the chassis. This set knocks off approximately 12g of weight, resulting in a lower CG and less roll. For …

The post Schelle Racing Titanium Upper Screw Kit for TLR 22 2.0 Mid appeared first on CompetitionX.