New from Tekno RC – an aluminum center diff support for the EB410 and ET410. This support is CNC-machined from 7075 aluminum and anodized gunmetal to match the other Tekno parts. It is a direct replacement for the stock plastic piece and attaches the same way to the top and lower plates. This aluminum part …

The post Tekno Aluminum Center Diff Support – EB410/ET410 | CompetitionX appeared first on CompetitionX.

RC Car Review: Tekno RC EB410 4WD 1:10 Scale Race Buggy Tekno RC’s EB410 has become one of the top contenders in the 1:10 Scale 4WD arena. Tough parts, a stout drivetrain and exceptional handling have really impressed us – we just can’t get enough driving in on one day! We’ve built it. We’ve run …

The post Review: Tekno RC EB410 4WD 1:10 Scale Race Buggy appeared first on CompetitionX.

Tekno’s EB410 comes equipped with 3 high-quality fluid-filled gear differentials. The front and rear use steel gears while the center (spur gear) comes with a strong molded plastic gear. Clean up any excess fluid with a rag and some motor spray, set them aside and we’re off to the next step.

The post Tekno EB410 Build – Part 1 – Differentials appeared first on CompetitionX.

The next step in our Tekno EB410 build is the steering system and bulkhead assembly. The EB410 uses a dual bellcrank steering setup that rides on a full set of bearings. The bulkheads are designed to completely encapsulate the diff, using molded plates on the bottom to seal everything up. Excellent. As a final check, …

The post Tekno EB410 Build – Part 2 – Steering and Bulkheads appeared first on CompetitionX.

Tekno has us building the rear suspension next; hubs, suspension arms, arm mounts and rear anti-roll bar. Great job. Your rear bulkhead and suspension are now built and ready to be installed onto the chassis. Get things straightened up and let’s move on to the front suspension.

The post Tekno EB410 Build – Part 3 – Rear Suspension appeared first on CompetitionX.

The next task in our Tekno EB410 build is the front suspension. This includes the steering knuckles, turnbuckles and extremely burly front suspension arms! Another fine job. Your front bulkhead and suspension is now built and ready to be installed onto the chassis. Take a moment to clean up your area and get ready for …

The post Tekno EB410 Build – Part 4 – Front Suspension appeared first on CompetitionX.

In Part 5 of our Tekno EB410 build, we’ll be attaching assemblies to the beautiful chassis. This includes the front and rear clips, center diff and all the miscellaneous bits that hold these pieces together. Check the drivetrain for binding by rotating it a few times. If it seems a little tight, that’s ok; Tekno …

The post Tekno EB410 Build – Part 5 – Chassis appeared first on CompetitionX.

The shocks on the Tekno EB410 are fantastic. They use 13mm hard-anodized bodies, 3.5mm shafts and a unique x-ring cartridge that prevents leakage. Once built, these are some of the silkiest dampers on the market! Awesome job on the shocks! Set your almost-completed EB410 aside and let’s get crackin’ on the final assembly stuff.

The post Tekno EB410 Build – Part 6 – Shocks appeared first on CompetitionX.

In this step of the Tekno EB410 build, we’ll be installing all the final parts to finish up the car; motor mount, steering links, velcro body mounting, etc. We won’t be showing the electronics just yet; that will be in the reveal video. Boom – done and done! Your EB410 is now ready for electronics. …

The post Tekno EB410 Build – Part 7 – Final Assembly appeared first on CompetitionX.

Tekno RC pretty much shocked the world when they released info about a 1:10 scale buggy coming to market. They’ve had some great success in the 1:8 scale scene, so it only seems fitting that a smaller car could do some damage to the other manufacturers. Looking at this ride, I’ve come to the conclusion …

The post Tekno EB410 4WD Buggy Build appeared first on CompetitionX.