It's a 2-fer!

The post TLR 8IGHT-X/E 2.0 4WD Combo Race Buggy | CompetitionX appeared first on CompetitionX.

Team Losi Racing (TLR) has announced the release of their next gen 22X-4 4WD buggy – the 22X-4 Elite! The Elite has updated features over the gen1 ride, including the tab-style battery mount, center diff fan mount, some suspension geometry updates and a whole slew of aluminum option parts. Here’s a list of the key …

The post TLR 22X-4 Elite 4WD Competition Buggy | CompetitionX appeared first on CompetitionX.

New from TLR is this V2 Servo Mount set for the 22X-4 buggy. This servo mount system has been revised, moving the aluminum mounting points back by 3mm and including spacers to adjust the mounting position of more makes of servos. It comes with two aluminum mounts, a tree of plastic spacers, two carbon fiber …

The post TLR Servo Mount Set V2 – 22X-4 | CompetitionX appeared first on CompetitionX.

TLR has a new horse in it’s stable – check out the 22T 3.0 Stadium Truck! The 22T 3.0 has been overhauled a bit to increase the performance, getting gifted these upgrades thanks to the successful 3.0 22 buggy. These revisions include a new motor location and 3-gear transmission, suspension geometry tweaks on both the …

The post TLR 22T 3.0 MM 2WD Stadium Truck Kit appeared first on CompetitionX.

Schelle Racing has a new aluminum rear camber block for your TLR 22 3.0. It’s been machined from billet aluminum to 6mm thick and has been anodized and laser etched with the Schelle logo. It’s 2-piece design allows for very fine tuning adjustment using washers and is accessible from above. Includes and instruction card for …

The post Schelle Racing Rear Camber Block for the TLR 22 3.0 appeared first on CompetitionX.

MIP’s new Bi-Metal Super Differential Kit uses an unconventional design that removes the standard diff pin and replaces it with a pair of 7075-T6 aluminum halves that reduce rotating mass by 30%. This kit also includes Tungsten Carbide Diff balls and MIP’s rebuildable machined aluminum T-Nut that provide you a longer lasting, smoother differential. Since …

The post MIP Bi-Metal Super Differential Kit for the TLR 22 Series appeared first on CompetitionX.

Team Losi Racing has released a new 3-gear conversion kit for their 22-series. This kit updates the 22 2.0, 22T 2.0 or 22SCT 2.0 mid-motor rides to a 3-gear transmission, a setup designed to be much more efficient for stock and spec racing. This kit comes with a 3-gear transmission case, front and rear braces …

The post TLR 3-Gear Transmission Conversion Kit for the 22-Series appeared first on CompetitionX.

Losi is jumping into the desert truck arena with the announcement of their new 1:10 Baja Rey. The Baja Rey is modeled after full scale desert trucks and includes some pretty impressive features! Power is provided by a Dynamite Fuze 3800kV brushless motor and 130A ESC, and the Baja Rey rolls on a pretty amazing-looking, …

The post Losi Baja Rey 1:10 Scale Desert Truck appeared first on CompetitionX.

Exotek has another cool part for all of you looking to lighten up your Losi 22 3.0 buggies. The ‘Flite’ Titanium Axles are machined to a 12mm hex, drilled to reduce weight and rounded for a easy, clean fit. They weigh in at only 3.25g a pair, nearly half the weight of the stock axles. …

The post Exotek Flite Titanium Axles for the Losi 22 3.0 Buggy appeared first on CompetitionX.

A couple weeks ago we brought you a sneak peek photo of a LCG laydown conversion gearbox that Exotek has in the works for the Losi 22 3.0. Well, it’s finally here complete with a whole lot of photos – and it looks awesome! The outer shell is a machined aluminum case that aligns the …

The post Exotek LCG Laydown Gearbox Conversion for the Losi 22 3.0 appeared first on CompetitionX.