The vehicle that helped re-define the 1/8 scale Truggy class is back – the Tekno NT48 2.2! This ride continues the legacy of greatness but brings quite a few new highlights to the table, including: • Lightened 7075 CNC Machined Shock Towers • NEW 140mm Rear Universal Driveshafts • NEW Precision Molded Shock Pistons and …

The post Tekno NT48 2.2 Truggy appeared first on CompetitionX.

Tekno RC has announced their next-gen 1/8 scale E-Truggy, the ET48 2.2! This new kit has been in development for the last 3 years and comes with a slew of updates to make it their best Truggy yet! Here are some of the new features to the ET48 2.2: • Lightened 7075 CNC Machined Shock …

The post Tekno ET48 2.2 Electric Truggy Kit | CompetitionX appeared first on CompetitionX.

New from ProTek is this Tire Bag (with Storage Tubes) designed for 1/8 scale Truggy applications. This bag measures 17″x12″x9″ in size and contains 6 tire tubes, each measuring 12.25″ tall by 6.6″ in diameter. Each tube can hold one full set (4) of 1/8 Truggy tires and is capped by a lid to help …

The post ProTek 1/8 Truggy Tire Bag | CompetitionX appeared first on CompetitionX.

WRC Professional Cars is entering the 1/8 scale Truggy market with the release of the RTX-1 and RTXE-1. Both off these rides share alot of the same features including a slew of CNC-machined parts, big bore shocks and a split front shock tower to accept their aerodynamic one-piece bodyshell! Two versions will be available – …

The post WRC RTX-1 / RTXE-1 1/8 Scale Truggy | CompetitionX appeared first on CompetitionX.

JConcepts has released info on the S15, a new Truggy body for the 1/8 scale field. This body embraces the low-body-open-front-tower design. It is a 2-piece body that features a cab-forward, low-profile look with channels that allow air to escape out the back. There are ‘winglets’ along the sides and a bed ‘scoop’ that deflects …

The post JConcepts S15 1/8 Scale Truggy Body | CompetitionX appeared first on CompetitionX.

AE's New Flagship Nitro Truggy

The post Team Associated RC8T4 Team Kit | CompetitionX appeared first on CompetitionX.

Welcome to Part 3 of the Tekno NT48 2.0 Nitro Truggy Build. This video is going to be short and sweet, working with the most important part of the Truggy’s suspension, the shocks! There’s nothing different to every other shock, but we decided to break it out into it’s own video to make it easy …

The post Video: Tekno NT48 2 0 Nitro Truggy Build – Part 3 appeared first on CompetitionX.

Welcome to Part 2 of the Tekno NT48 2.0 Nitro Truggy Build. In this video we’re diving in deep – the front and rear suspension, steering, anti-roll bars and getting all that on the chassis. This is a longer than normal video so take you time to ingest it – maybe grab a drink or …

The post Video: Tekno NT48 2 0 Nitro Truggy Build – Part 2 appeared first on CompetitionX.

Welcome to Part 1 of the Tekno NT48 2.0 Nitro Truggy Build. If you followed along with our ET48 2.0 Truggy build, I’m sure a lot of this is going to look familiar – the two Truggys use almost all the same parts. In this video, we go over the tools we suggest for a …

The post Video: Tekno NT48 2 0 Nitro Truggy Build – Part 1 appeared first on CompetitionX.

Welcome to Part 6 of the Tekno ET48 2.0 online build. This is the final video in this Series where we wrap up the build – the final assembly bits, body, rear wing, wheels, tires and electronics. In the first part of the video we finalize the build without the electronics, getting you familiar with …

The post Video – Tekno ET48 2.0 E-Truggy Build Part 6 | CompetitionX appeared first on CompetitionX.