Tag: rc racing setup
RC Belt Tension Explained
What Is Belt Tension? Belt tension refers to how tight or loose the drive belts are within a belt-driven RC drivetrain. These belts connect the ... Read More
RC Suspension Mounts Explained
What Are Suspension Mounts? Suspension Mounts are the blocks or braces that hold your suspension arms to the chassis. They define the hinge pin location ... Read More
RC Roll Out Explained
What Is Roll Out? Roll Out is the distance your RC car travels forward in one full rotation of the drive wheels. It combines your ... Read More
RC Track Width Explained
What Is Track Width? Track Width refers to the distance between the left and right wheels on the same axle. This can be measured at ... Read More
RC Roll Center Explained
What Is Roll Center? Roll Center is an imaginary point in your suspension geometry that represents where your chassis “rolls” around during cornering. It is ... Read More
RC Axles (Inline vs Trailing) Explained
What Are Axles (Inline vs Trailing)? Axles are the components that connect your front wheels to the steering system and allow them to rotate while ... Read More
RC Toe In / Toe Out Explained
What Is Toe In / Toe Out? Toe In / Toe Out refers to the angle of the wheels when viewed from above. • Toe ... Read More
RC Ride Height Explained
What Is Ride Height? Ride Height is the distance between the chassis of your RC car and the ground. It is typically measured at the ... Read More
RC Gear Pitch Explained
What Is Gear Pitch? Gear Pitch refers to the size and spacing of the teeth on your RC car’s pinion and spur gears. It defines ... Read More
RC Chassis Type Explained
What Is Chassis Type? Chassis Type refers to the material and construction of the main chassis plate or structure of your RC car. It is ... Read More
RC Caster Explained
What Is Caster? Caster refers to the angle of the steering axis when viewed from the side of the vehicle. It is the angle formed ... Read More
RC Camber Explained
What Is Camber? Camber refers to the angle of a tire when viewed from the front or rear of the car. It describes whether the ... Read More
RC Battery Position Explained
What Is Battery Position? Battery Position refers to where the battery is mounted within the chassis of your RC car, specifically its front-to-rear and sometimes ... Read More
RC Axle Height Explained
What Is Axle Height? Axle Height refers to the vertical position of the wheel axle relative to the suspension arm or hub carrier. In simple ... Read More
RC Anti-Squat Explained
What Is Anti-Squat? Anti-Squat is a rear suspension geometry setting that controls how much the rear of your RC car compresses (or “squats”) under acceleration. ... Read More
