TC6TEK Performance ultra narrow lipo chassis conversion with bushing supported hinge pin blocks for the TC6.1 or TC6.
– New design incorporates heavy duty bushing supported hinge pin blocks- the same concept incorporated into other world caliber touring cars by Tamiya, Yokomo and Hot Bodies.
– The steel insert bushings insure ultra free suspension movement, no matter the arm angles. – No locked up and twisted stock plastic blocks- by it’s design the stock TC6 suspension creates more suspension arm lock (friction) onto the hinge pins as more power is put down.
– Newly designed 7075 heavy duty bulkheads included. Shortened design allows for improved chassis flex.
– 4 heavy duty 7075 suspension blocks are included, FF-C, FR-C (split style), RF-XB (split style), RR-D (see the attached chart to view angles). The included blocks will give you 0 degree of front arm sweep and 3 degrees of rear toe.
– Optional hinge blocks are available to quickly adjust the angles to your liking HERE. Also fully compatible with Tamiya sedan blocks.
– Optional hinge spacers are used to adjust for roll center HERE.- 2.25mm USA made precision cut soft weave carbon fiber.
– Only 84mm wide at the main chassis section to better utilize lower ride heights for more aggressive cornering.
– Shaped cuts for improved flex.
– Includes adjustable carbon fiber lipo craddles.
– Uses the stock steering crank and servo mounting. Double bellcrank alloy steering set with lateral servo mounting is in the prototype stages and will be released later!
$169.95 msrp.
TC6.1 or TC6 is required.
3 x .1mm hinge pin shims are suggested for fine shimming.
[source: www.exotekracing.com]
