RC Build Blog

Hello everyone and welcome to the final chapter in the Tekno NT48 2.0 Nitro Truggy Build. We wrap up the Truggy build with the electronics install, engine parts, steering and throttle linkages as well as …

Welcome to Part 3 of the Tekno NT48 2.0 Nitro Truggy Build. This video is going to be short and sweet, working with the most important part of the Truggy’s suspension, the shocks! There’s nothing …

Welcome to Part 2 of the Tekno NT48 2.0 Nitro Truggy Build. In this video we’re diving in deep – the front and rear suspension, steering, anti-roll bars and getting all that on the chassis. …

Welcome to Part 1 of the Tekno NT48 2.0 Nitro Truggy Build. If you followed along with our ET48 2.0 Truggy build, I’m sure a lot of this is going to look familiar – the …

Welcome back to Part 4 and the final installment to Tamiya’s XV-02 Pro Rally video build. We wrap up this Series with the shock assembly, installing the rest of the electronics (ESC, servo and receiver), …

Thanks everyone for tuning in to Part 3 of the Tamiya XV-02 Pro online video build. In this video we continue the suspension assembly with the caster blocks, rear hubs, shock towers and CVDs. We …

Welcome to Part 2 of our Tamiya XV-02 Pro Online Build Video Series. In this video, we dive deeper into the XV-02 build – assembly of the lower suspension parts, arm mounts and center drivetrain. …

Welcome everyone to our Tamiya XV-02 Pro Online Build Video Series. In this video, Part 1, we start the build process with an intro regarding the tools we suggest you have to make the build …

We are happy to bring you the unboxing video of the Tamiya XV-02 Pro Rally car. This is Tamiya’s latest and greatest 1/10 scale Rally car complete with a new tub chassis layout, centralized motor, …

We LOVE F1 racing on this channel, so when we found out that Tamiya was re-releasing the Tyrrell P34 Six-Wheeler, we knew we had to get one! This is a re-release of the six-wheeler that …