Wednesday , 26 February 2020
Home » NEWS FEED » RC4WD Late January 2017 Releases – 10 Great New Scaler Parts

RC4WD Late January 2017 Releases – 10 Great New Scaler Parts

RC4WD Late January 2017 Releases - 10 Great New Scaler Parts

RC4WD has released 10 new scaler parts for the end of January. We got tires. We got headers. We got complete axle sets … let’s dig into all the cool parts released today!

RC4WD Scrambler Offroad 1.55″ Scale Tires
The first item up are these great-looking 1.55″ scale tires. The Scrambler Offroads are molded in the Advanced X2 SS Compound so they’re super soft as well as super sticky. They have an outer diameter of 3.84″ and a width of 1.69″. They are sold in pairs and include foam inserts.

RC4WD Attitude M/T 1.9″ Scale Tires
The next tires the 1.9″ Attitude M/Ts. They also come in the Advanced X2 SS Compound and have a 4.75″ outer diameter with a 1.64″ width. Like the Scramblers, they are sold in pairs and include foam inserts.

RC4WD Plastic Exhaust Headers for the V8 Motor
Got one of RC4WD’s V8 engines? Well then you’re going to need a set of these bad ass exhaust headers. The left and right sides are 3D printed from a resin material and bolt right onto the side of the engine using included M1.6x4mm bolts. Also included is a hex bolt tool for the M1.6mm screws.

RC4WD Leverage High-Clearance Front Axle for the Axial SCX10/AX10
This next part is a pretty interesting one – it’s an alloy front axle for the Axial SCX10/AX10 that is machined to give the front end a bit more clearance. It is CNC-machined from billet aluminum and anodized black with a cool-looking ‘R’ etched on the front. A heavy duty bevel gear set (39T/15T) is pre-installed as are the heavy duty 4mm axles. It has a machined 12mm wheel hexes, servo mount, steering arms, C-hubs and steering blocks. Bolts right on to the front of your SCX10/AX10.

RC4WD Leverage High-Clearance Rear Axle for the Axial SCX10/AX10
Similar to the front axle, this Leverage High-Clearance Rear Axle for Axial’s SCX10 and AX10 features a billet-machined casing loaded with 4mm axles and a heavy duty bevel gear set (39T/15T). It is anodized black with the ‘R’ etched on the face and comes with 84 and 91mm links.

RC4WD Leverage High-Clearance Axle Links for the Axial SCX10/AX10
To compliment the Leverage High-Clearance Front Axle, RC4WD has these axle links that are CNC-machined and anodized black. Everything is included to attach them to the steering on the front of your Axial SCX10/AX10.

RC4WD Knuckle Bushings for the Yota II Axle
In case you’ve lost any of your steering knuckle bushings, RC4WD has released a set of 8 replacements (4 short, 4 tall). They are machined from steel and are designed to fit the Yota II axle.

RC4WD Standard Hitch with Hitch Mount
The next item, a standard hitch and hitch mount, are designed to attach to the rear of your truck an allow you to pull a trailer. CNC-machined from billet aluminum, this multi-piece unit comes pre-assembled and ready to install.

RC4WD Rear Trailing Arms for the Axial Yeti XL
Here’s something you Axial XL users are going to dig; billet aluminum trailing arms! RC4WD has CNC-machined these bad boys with a fantastic design on the side complete with the RC4WD logo. They are a direct replacment and come with the ball ends and set screws. They come as a pair and are anodized in gunmetal.

RC4WD Assembly Combo Pack (Oil, Threadlock and Grease)
Finally, something every builder needs; RC4WD’s Assembly Combo Pack. This pack contains the most used fluids in any project; 35W shock fluid (.34oz), blue threadlocker (.07oz) and axle/transmission grease (.07oz). They come in resealable packages so you can close them up after use.

Z-T0152 RC4WD Scrambler Offroad 1.55″ Scale Tires
Z-T0149 RC4WD Attitude M/T 1.9″ Scale Tires
Z-S1775 RC4WD Plastic Exhaust Headers for the V8 Motor
Z-A0109 RC4WD Leverage High-Clearance Front Axle for the Axial SCX10/AX10
Z-A0111 RC4WD Leverage High-Clearance Rear Axle for the Axial SCX10/AX10
Z-A0113 RC4WD Leverage High-Clearance Axle Links for the Axial SCX10/AX10
Z-S1784 RC4WD Knuckle Bushings for the Yota II Axle
Z-S1781 RC4WD Standard Hitch with Hitch Mount
Z-S1733 RC4WD Rear Trailing Arms for the Axial Yeti XL
Z-S1732 RC4WD Assembly Combo Pack (Oil, Threadlock and Grease)

For more information, please visit: www.rc4wd.com

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 25 years. He has raced everything from 1:18th scale trucks to 1:5 scale motorcycles and everything in-between. He's also worked on both sides of the industry fence; working at and with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and has transferred that knowledge to CompetitionX - the most informative RC website on the internet! More articles by Tony Phalen

Check Also

Exotek Aluminum Rear Laydown Bulkhead for the Kyosho RB7 | CompetitionX

Exotek Aluminum Rear Laydown Bulkhead for the Kyosho RB7 | CompetitionX

Strengthen your Kyosho RB7’s laydown gearbox with this aluminum bulkhead from Exotek Racing. This bulkhead/camber …

Leave a Reply

Your email address will not be published. Required fields are marked *