Sunday , 26 January 2020
Home » Tag Archives: tamiya

Tag Archives: tamiya

Hop Up Corner: Tamiya Dancing Rider

Hop Up Corner: Tamiya Dancing Rider

Best Performance Parts for Your Tamiya Dancing Rider Tamiya’s Dancing Rider has become a very popular little 3-wheeler. It addition to it’s unique design, it’s a very fun little trike to drive. Moderate speeds, delightful …

Read More »

Tamiya Toyota Supra Racing A80 – TT-02 Chassis | CompetitionX

Tamiya Toyota Supra Racing A80 - TT-02 Chassis | CompetitionX

Another new release from Tamiya is this Toyota Supra Racing A80! Riding on the TT-02 chassis, this Supra features 4WD, 4-wheel independent suspension and a tub chassis. All the current hop-ups for the TT-02 will …

Read More »

Tamiya Eunos Roadster – M-06 Chassis | CompetitionX

Tamiya Eunos Roadster - M-06 Chassis | CompetitionX

Tamiya has announced the release of the Eunos Roadster, also known as the Mazda Miata MX-5. This 1/10 scale hardtop will be fitted to their M-06 chassis with the rear-motor/RWD configuration. This sets it right …

Read More »

Tamiya CC-02 Trail Truck Build | CompetitionX

Tamiya CC-02 Trail Truck Build | CompetitionX

Originally published on CompetitionX Tamiya’s CC-01 chassis has been on the longest running trail truck chassis’ to date. It featured a faux ladder-frame design that surrounded a single-piece tub chassis and included a front independent/ …

Read More »

Tamiya CC-02 Trail Truck Build – Part 8 – Final Steps | CompetitionX

Tamiya CC-02 Trail Truck Build – Part 8 – Final Steps | CompetitionX

Wrapping up the Tamiya CC-02 build, we’ll be installing the front and rear bumper, body mounts and wheels and tires. Again, the body wasn’t quite done for this build so we’ll be skipping that until …

Read More »

Tamiya CC-02 Trail Truck Build – Part 7 – Electronics | CompetitionX

Tamiya CC-02 Trail Truck Build – Part 7 – Electronics | CompetitionX

The Tamiya CC-02 comes with the TBLE-02S ESC and Mabuchi brushed motor. If you choose to swap those parts out, know that almost any electronics will work; full-size servo, 540 motor, standard ESC and receiver. …

Read More »

Tamiya CC-02 Trail Truck Build – Part 6 – Shocks | CompetitionX

Tamiya CC-02 Trail Truck Build – Part 6 – Shocks | CompetitionX

The shocks on the Tamiya CC-02 are pretty basic – plastic bodies with ride height clips, internal bladder, dual o-ring lower cartridge and a one-piece piston/shock shaft plunger. While not amazing, they’ll certainly get the …

Read More »

Tamiya CC-02 Trail Truck Build – Part 5 – Rear Axle | CompetitionX

Tamiya CC-02 Trail Truck Build – Part 5 – Rear Axle | CompetitionX

The rear axle on the Tamiya CC-02 is similar to the front. It can be built with an open or locked diff, uses hidden M3 nuts and has the link mounts (and links) attached the …

Read More »

Tamiya CC-02 Trail Truck Build – Part 4 – Front Axle | CompetitionX

Tamiya CC-02 Trail Truck Build – Part 4 – Front Axle | CompetitionX

Unlike the original CC-01, the Tamiya CC-02 now comes with a solid front axle that can be built with either an open or locked differential. This can be changed to alter the way the truck …

Read More »

Tamiya CC-02 Trail Truck Build – Part 3 – Driveshafts | CompetitionX

Tamiya CC-02 Trail Truck Build – Part 3 – Driveshafts | CompetitionX

The Tamiya CC-02 uses sliding propeller shafts to transfer power from the gearbox to the front and rear axles. They are both of equal length and use metal ‘balls’ for extra strength. Easy step, right? …

Read More »