Speed Passion Aventador 40A and 80A Waterproof Sensored ESC

Speed Passion has released the Aventador, a waterproof, sensored ESC that is perfect for on and offroad car use. It’s loaded with the latest DRRS Version 3.0 software and is a part of Speed Passion’s Dynamic Sensor Technology Series, a state-of-the-art software program that combines maximum efficiency with a wide power band.

Additional features include proportional, 11-step ABS braking, 4 running modes and and easy-set, 4-button programming. It also comes with multiple safety protection systems including low voltage cut-off, overheat protection and throttle signal loss protection.

The Aventador is compatible with all sensored and sensorless brushless motors down to a 5.5T limit.

The best part is it’s SUPER low price – $36 for the 40A version and $44 for the 80A version.

Speed Passion Aventador 40A Specs:
Continuous/Burst Current: 40A / 250A
Resistance: 0.0005 ohm
Brushless Motor Limit: 7.5T or slower
Maximum Battery: 6-8 Cell Ni-xx (NiMh or NiCd) or 2 Cell Li-Po / 2 Cell Li-Fe
– For 6 Cell Ni-xx or 2s Lipo: Use the standard fan supplied with the ESC;
– For 7-9 Cell Ni-xx: The included ESC fan is not compatible with high voltage. ESC fan must be replaced with a high voltage fan or connect the fan to the receiver port (+5V)
BEC Output: 6.0V / BEC 2A
ESC Type: Sensored /Sensorless
Motor Type: Sensorless or Sensored brushless motor
Dimension: 33mm (L) x 33mm (W) x 19mm (H) (Without cooling fan and wires)
ESC Fan: 25mm
Supports Smart LCD program card with USB software upgrade: Yes
Battery voltage display: Yes
Temperature display: Yes
Racing Profile setting: Drift 1, Modify 0, Modify 1, Rock Crawler & Stock 0

Speed Passion Aventador 80A Specs:
Continuous/Burst Current: 80A / 440A
Resistance: 0.0003 ohm
Brushless Motor Limit: 7.5T or slower (for turbo firmware) / 5.5T or slower (for no turbo firmware)
Maximum Battery: 6-8 Cell Ni-xx (NiMh or NiCd) or 2 Cell Li-Po / 2 Cell Li-Fe
– For 6 Cell Ni-xx or 2s Lipo: Use the standard fan supplied with the ESC;
– For 7-9 Cell Ni-xx: The included ESC fan is not compatible with high voltage. ESC fan must be replaced with a high voltage fan or connect the fan to the receiver port (+5V)
BEC Output: 6.0V / BEC 2A
ESC Type: Sensored /Sensorless
Motor Type: Sensorless or Sensored brushless motor
Dimension: 33mm (L) x 33mm (W) x 19mm (H) (Without cooling fan and wires)
ESC Fan: 25mm
Supports Smart LCD program card with USB software upgrade: Yes
Battery voltage display: Yes
Temperature display: Yes
Racing Profile setting: Drift 1, Modify 0, Modify 1, Rock Crawler & Stock 0

SP001186 Speed Passion Aventador 40A Waterproof Sensored ESC
SP001187 Speed Passion Aventador 80A Waterproof Sensored ESC

[source: www.rcmart.com]