Friday , 27 June 2025

Traxxas EZ-Peak 5A NiMH Battery Charger

Traxxas EZ-Peak 5A NiMH Battery Charger
Traxxas EZ-Peak 5A NiMH Battery Charger

The new Traxxas EZ-Peak™ 5amp NiMH Charger delivers 25% more power and 20% faster charging than standard 40Watt chargers, resulting in less downtime and more runtime. Some chargers advertise fast, 5-amp charge rates, but are only rated for 40Watts of power. Other chargers require connection to a DC power supply or a 12V battery to deliver full charging current. The EZ-Peak 5amp (available as Part #2937X) delivers 50Watts of power from a standard AC wall outlet to charge 7-cell NiMH battery packs in record time—approximately 35 minutes! Simple push-button operation with selectable charge rates makes it easy to charge Traxxas Power Cell™ NiMH batteries, 5-cell receiver packs, and 4- to 8-cell NiCad and NiMH packs. Just plug in your battery pack, select the charge rate, and push the “Start” button to begin charging with the EZ-Peak 5amp. Advanced peak-detection circuitry makes sure the battery receives a perfect charge every time. The color-coded charge status LEDs indicate charging progress for foolproof charging, peak performance, and maximum runtime.

A convenient USB port is perfect for charging mobile electronics and is compatible with the USB-powered chargers for the DR-1 and QR-1 helicopters. The integrated receiver (RX) battery charge port allows charging of 4- or 5-cell receiver packs.

The EZ-Peak 5amp Charger is equipped with a Traxxas High-Current Connector for use with all Traxxas NiMH Power Cell packs and all NiCad and NiMH battery packs equipped with Traxxas connectors. Also, the EZ-Peak 5amp is backed by the Traxxas Lifetime Electronics Warranty for years of reliable service.

Convenient USB Charging
A convenient USB port is perfect for charging mobile electronics and it is compatible with the USB-powered chargers for the DR-1 and QR-1 helicopters. The 5V/1A USB port is on an independent circuit, so you can charge your mobile electronics and batteries simultaneously.

Integrated RX Charging Port
The EZ-Peak™ 5amp NiMH charger is equipped with an integrated RX charging port for charging 4-5 cell receiver packs.

Charge Status LEDs
The color coded charge status LEDs indicate charging progress for foolproof charging, peak performance, and maximum run time.

AC/DC Power Source
The EZ-Peak™ 5amp NiMH charger is equipped for both AC and DC power, allowing you to charge your Power Cell battery packs almost anywhere.

High-Current Connector
The EZ-Peak 5amp charger is equipped with a Traxxas High-Current Connector for use with all Traxxas NiMH Power Cell packs and all NiCad and NiMH battery packs equipped with Traxxas connectors.

EZ-PEAK 5amp NiMH (#2937X) SPECIFICATIONS
AC Input: 100–240 Volts
DC Input: 12–18 Volts
Charge Current Range: 1.0A–5.0A (50W Max.)
NiCad/NiMH Battery Cell Count: 4-8 Cells
Receiver Battery Cell Count: 4-5 Cells (1A Max.)
Net Weight: 340g
Dimensions: 147 x 104 x 40mm

2937X Charger, EZ-Peak 5amp NiMH AC/DC

[source: www.traxxas.com]

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 30 years. He has participated in every kind of surface racing events - 1/18 scale trucks, 1/10 scale TC, Rock Racers, Rally - if it had wheels, he's raced it! He's also worked on both sides of the industry fence; collaborating with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and is sharing that knowledge on CompetitionX - the most informative RC website on the internet!

Check Also

SOR Racing FDH Scale Audio Speaker Systems

SOR Racing FDH Scale Audio Speaker Systems

Time to take your scale build to the next level with SOR Racing’s FDH Scale …