Tuesday , 26 March 2024

Team Associated TC6.1 Build – Step 6 – Motor Mount

CompetitionX Build Blog

Team Associated TC6.1 Build
Team Associated TC6.1 Build

The Build – Part 6
The motor mount on the TC6.1 is a simple 3-step process. Get ready for easy.

Build Notes:
The motor mount on the TC6.1 is all aluminum. This means you’ll want plenty of loctite on the screws to help keep them in place.

Team Associated TC6.1 Build - Step 54
Team Associated TC6.1 Build - Step 54
Start off by attaching the left and right spur-gear bulkheads. These two aluminum pieces are exactly the same so there is no worry of mixing them up.

Team Associated TC6.1 Build - Step 55
Team Associated TC6.1 Build - Step 55
Next, attach the actual motor mount. Don’t forget the loctite.

Team Associated TC6.1 Build - Step 56
Team Associated TC6.1 Build - Step 56
Finally, attach the motor mount brace. Don’t forget the loctite here, either.

Part 7 – Assembling the front shock tower.
Back to the Team Associated TC6.1 Build List

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 30 years. He has participated in every kind of surface racing events - 1/18 scale trucks, 1/10 scale TC, Rock Racers, Rally - if it had wheels, he's raced it! He's also worked on both sides of the industry fence; collaborating with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and is sharing that knowledge on CompetitionX - the most informative RC website on the internet!