Optimized Mounting

The post T-Works Lightweight Aluminum Wing Washer Screws | CompetitionX appeared first on CompetitionX.

New from T-Works is this graphite carrying handle for the new Futaba 10PX radio system. This carrying handle is cut from quality carbon and attaches to the back of your Futaba 10PX radio with supplied hardware. It gives you a easy and safe way to carry the radio to and from the pits. What We …

The post T-Works Graphite Carrying Handle – Futaba 10PX | CompetitionX appeared first on CompetitionX.

New from T-Works is this gorgeous carbon fiber/aluminum car stand for 1/10 scale Touring Cars. It comes unassembled with a top plate footprint of 17cm long x 10cm wide by 3cm tall, perfect for not only 1/10 scale TCs but all 1/12 scale pan cars and M-Chassis rides. The stand also comes with a sheet …

The post T-Works 1/10 Touring Car Stand V2 | CompetitionX appeared first on CompetitionX.

Upgrade your stock plastic steering system with this aluminum setup from T-Work’s. What We Like: First off, it’s strong – 7075-T6 aluminum. Second, it’s bearing supported for an extremely smooth swinging action. Then it’s anodized black for a stealth look. We also love that the center of the drag link is NOT hollow, making it …

The post T-Works Aluminum Steering Set – Tamiya TC-01 | CompetitionX appeared first on CompetitionX.

T-Works has introduced a new aluminum motor plate setup for the Tamiya TC-01. It includes a carbon fiber upper front plate as well plus all the mounting hardware. For the Tamiya TC-01, T-Works have produced even more new option parts. Starting with a 7075-T6 aluminium motor plate mount & graphite front upper plate, the set …

The post T-Works Aluminum Motor Plate – Tamiya TC-01 | CompetitionX appeared first on CompetitionX.

T-Works has introduced a new 54mm center driveline part for the Tamiya TC-01 Touring Car. This part replaces the stock 2-piece setup and will work in both the front and rear of the car. What We Like: While the OG center driveline is steel (and, as mentioned above, 2 pieces), we’ve seen quite a few …

The post T-Works Aluminum 54mm Center Driveshaft – Tamiya TC-01 | CompetitionX appeared first on CompetitionX.

T-Works has announced even MORE new parts for the Tamiya TC-01 Formula E car. There are 3 new parts – let’s take a quick look at them: These aluminum suspension mounts replace the stock plastic parts and come machined from quality aluminum. They are anodized black with silver chamfers and include swivel balls for the …

The post T-Works TC-01 Upgrade Parts – Part 2 | CompetitionX appeared first on CompetitionX.

T-Works is coming on strong with aftermarket parts for the Tamiya TC-01, as evident here with another new item – a steel center CVD. This CVD is 54mm long and will work in either the front or back position of the TC-01 center drive system. It will accept the stock bearings, spacer and E-clip to …

The post T-Works Steel Center CVD – Tamiya TC-01 | CompetitionX appeared first on CompetitionX.

New from T-Works are these upgrade parts for the Tamiya TC-01 Formula E car. There are 3 new parts – let’s take a quick look at them: There are 3 new parts, the first being a graphite servo and transponder mounting plate. This plate replaces the kit’s multi-piece version and includes screw-in mounting points for …

The post T-Works TC-01 Upgrade Parts | CompetitionX appeared first on CompetitionX.