Saturday , 28 November 2020
Home » NEWS FEED » T-Works TC-01 Upgrade Parts – Part 2 | CompetitionX

T-Works TC-01 Upgrade Parts – Part 2 | CompetitionX

T-Works TC-01 Upgrade Parts - Part 2 | CompetitionX

T-Works has announced even MORE new parts for the Tamiya TC-01 Formula E car.

There are 3 new parts – let’s take a quick look at them:

T-Works TC-01 Upgrade Parts - Part 2 | CompetitionXThese aluminum suspension mounts replace the stock plastic parts and come machined from quality aluminum. They are anodized black with silver chamfers and include swivel balls for the hinge pins. They reduce flex as well as give a solid mounting point for the hinge pins. They are sold as a set of 4.

TE-TC01-H T-Works Aluminum Suspension Mounts

T-Works TC-01 Upgrade Parts - Part 2 | CompetitionXThese suspension mounts are the same as the ones above but feature a +1mm difference in the hole placement. These can be used to raise or lower the hinge pin, or even mix them to give your car some kickup. They are sold in pairs and include swivel balls for the hinge pins.

TE-TC01-H1 T-Works Aluminum Suspension Mounts +1

T-Works TC-01 Upgrade Parts - Part 2 | CompetitionXThe final new part (for now) is this aluminum front spool unit. It comes with the aluminum center piece, a pair of outdrives and cross pins. It appears to use a dual-pin setup on each side to keep the outdrive on – not entirely sure. However, this is a great option for locking the front diff for the ultimate performance on your TC-01!

TE-TC01-K T-Works Aluminum Front Spool

For more information, please visit: www.rc-tworks.com

Check out more cool products from TWorks on CompetitionX.

Make sure you visit and subscribe to our YouTube Channel (CompetitionX YouTube) for up to date videos on all the current products!

Notice: Some of our articles, videos and descriptions may contain affiliate links, which means that if you click on one of the product links, we may receive a small commission. This helps support the website and social media channels and allows us to continue to produce content. Thank you for the support!

#tworks #rccars #competitionx

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 25 years. He has raced everything from 1:18th scale trucks to 1:5 scale motorcycles and everything in-between. He's also worked on both sides of the industry fence; working at and with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and has transferred that knowledge to CompetitionX - the most informative RC website on the internet!

Check Also

HB Racing E819RS 1/8 Scale Electric Buggy | CompetitionX

HB Racing E819RS 1/8 Scale Electric Buggy | CompetitionX

Back in September we had a quick blurb about HB Racing’s new E819RS 1/18 Scale …

Leave a Reply

Your email address will not be published. Required fields are marked *