Thursday , 27 February 2020
Home » Tag Archives: pro-line racing

Tag Archives: pro-line racing

Tekno RC EB410.2 4WD Buggy Build Part 9 – Final Assembly | CompetitionX

Tekno RC EB410.2 4WD Buggy Build Part 9 – Final Assembly | CompetitionX

In this final step of the Tekno EB410.2 build, we’ll be installing the body mounts, wing, wheels and tires and body. Quick and easy so we can get it on the track for some fun! …

Read More »

Tekno RC EB410.2 4WD Buggy Build Part 8 – Electronics | CompetitionX

Tekno RC EB410.2 4WD Buggy Build Part 8 – Electronics | CompetitionX

The Tekno EB410.2 can accept most major electronics; tall or short servos and normal sized receivers. Most brushless ESC’s fit as well, however you might need to get creative if they come with external capacitors. …

Read More »

Tekno RC EB410.2 4WD Buggy Build Part 7 – Shocks | CompetitionX

Tekno RC EB410.2 4WD Buggy Build Part 7 – Shocks | CompetitionX

Tekno’s EB410.2 uses a top-of-the-line set of big bore shocks. They include aluminum threaded bodies, bottom-load cartridges, massive plastic caps (with integrated bleeder hole) and a grub-screw lower portion that keeps the lower spring retainer …

Read More »

Tekno RC EB410.2 4WD Buggy Build Part 6 – Chassis Assembly | CompetitionX

Tekno RC EB410.2 4WD Buggy Build Part 6 – Chassis Assembly | CompetitionX

In this step, we’ll be attaching the front clip, the rear clip and the center diff to the chassis. Easy peasy, right? Your Tekno EB410.2 is starting to take shape! Good job – let’s move …

Read More »

Tekno RC EB410.2 4WD Buggy Build Part 5 – Front Suspension | CompetitionX

Tekno RC EB410.2 4WD Buggy Build Part 5 – Front Suspension | CompetitionX

The front suspension build on the Tekno EB410.2 is very similar to the rear; anti-roll bar, aluminum arm mounts will plastic pills, etc. We will also be installing the caster and steering blocks as well …

Read More »

Tekno RC EB410.2 4WD Buggy Build Part 4 – Rear Suspension | CompetitionX

Tekno RC EB410.2 4WD Buggy Build Part 4 – Rear Suspension | CompetitionX

The rear suspension on the Tekno EB410.2 is similar to the .1; beefy arms, anti-roll bar, aluminum arm mounts with press-in plastic pills, etc. The biggest difference is that the shocks are now mounted to …

Read More »

Tekno RC EB410.2 4WD Buggy Build Part 3 – Rear Bulkhead | CompetitionX

Tekno RC EB410.2 4WD Buggy Build Part 2 – Rear Bulkhead | CompetitionX

The rear bulkhead on the Tekno EB410.2 is very similar to the front, minus the steering. Most of the steps are the same, so we’ll only briefly cover those. And now your rear bulkhead is …

Read More »

Tekno RC EB410.2 4WD Buggy Build Part 2 – Steering/Front Bulkhead | CompetitionX

Tekno RC EB410.2 4WD Buggy Build Part 2 – Steering/Front Bulkhead | CompetitionX

The steering system on the Tekno EB410.2 is exactly like the .1, using a reversed bellcrank setup that is supposed to give a more consistent steering response (however I’ve never driven a Tekno with a …

Read More »

Tekno RC EB410.2 4WD Buggy Build Part 1 – Differentials | CompetitionX

Tekno RC EB410.2 4WD Buggy Build Part 1 - Differentials | CompetitionX

Tekno’s EB410.2 comes equipped with 3 high-quality fluid-filled gear differentials. The front and rear differentials include steel gears while the center diff uses a thick, plastic spur gear. Excellent – diffs done! Go ahead and …

Read More »

Tekno RC EB410.2 4WD Buggy Build | CompetitionX

Tekno RC EB410.2 4WD Buggy Build | CompetitionX

Originally published on CompetitionX The original EB410 was an instant success, winning races in the hands of both beginner and seasoned drivers. The car was easy to work on and built like a tank, making …

Read More »