The guys over at RC4WD have been working overtime – they’ve included 16 new products in their Mid-October 2016 Press Release! Let’s take a look at what’s in store…
RC4WD Flexfit Embroidered Hat
Support RC4WD with this sharp-looking Flexfit cap. It’s black, features Flexfit technology and comes with the RC4WD logo embroidered on the front and back. It’s available in Large and X-Large sizes.
RC4WD Embroidered Beanie
Winter is coming and keeping your dome warm is essential. Why not do it and support RC4WD as well? This beanie is made from 100% hypoallergenic acrylic and flexes to fit any size head. It comes with the RC4WD logo on the front and back. It even covers your ears!
Killer Krawler 2 Axle Ring and Pinion Gears
These gears are designed as replacements for RC4WD’s 1/4 scale Killer Krawler 2 rig. They are cut from hardened steel, have a CNC-machined aluminum housing and have a drive ratio of 2.6:1. Kit includes 1 main gear and 1 pinion shaft.
RC4WD Roof Rack for the Defender D110
This beautiful roof rack is constructed from stainless steel and hand welded for precision. It is powder coated black and bolts right on top of the Defender D110. Raised sides elevate it off the roof, and additional siding on top helps prevent gear from falling off. It has a total length of 12.67″ and a width of 6.55″.
RC4WD Ladder for the Defender D90/D110
Another cool part for the Defender D110 (and D90) is this rear ladder. It’s made from stainless steel and powder coated black. It secures to the rear of your Defender with included hardware and clears any rear tire mounts you might have.
RC4WD Front Winch Bumper for G2 Cruiser
This bumper is designed to fit the Gelande II kit with the Toyota Cruiser body set. It’s hand-welded from stainless steel and powder coated black. It comes with mounts and mounting hardware and has mounting provisions for RC4WD’s Warn 9.5cti Winch.
RC4WD Defender Design Steering Guard for Land Rover Defender (Gelande II D90/D110)
This cool little product mounts to the underside of your Gelande II D90 or D110 and protects the steering linkage. It’s stamped from aluminum and powdercoated with a stainless steel cover. It also includes a set of 5mm driving lights that peek through openings in the guard. A cool feature is the ‘Defender’ logo cut into the stainless on the leading edge.
RC4WD Grid Design Steering Guard for the Land Rover Defender (Gelande II D90/D110)
This cover is exactly the same as the Defender Design guard above; the only difference is instead of the ‘Defender’ logo on the leading edge, it has a grid pattern cut into it.
RC4WD 1:10 Tire Holder for Defender D90/D110
This tire mount attaches to the rear of your Defender D90 or D110, giving the ability to mount a rear tire to your truck. It’s made from stainless steel and powder coated black. It’s mounts the tire 22.8mm from the body, allowing ample clearance for most tires. Includes mounting hardware.
RC4WD Side Sliders for Defender D110
These Side Sliders are hand-welded from stainless steel and powder coated for durability. Mounting hardware is included as is are the stainless steel, anti-slip attachments. Fits the Defender D110.
RC4WD Roof Rack with Lights for the Defender D90
Another roof rack, but this time for the Defender D90. It’s similar to the one mentioned above for the D110 – stainless steel construction with black powder coating, but this one comes with a 3mm LED light set; 4 lights in all.
RC4WD 1:10 Sand Ladder
These ladders are made from stainless steel and sand blasted for a realistic finish. They are 140mm long and 60.9mm wide and can be easily mounted on your Defender’s roof rack. They are sold individually.
RC4WD Metal Roll Bar Rack for Axial SCX10 Wrangler
Want to add some roll-over protection to your Axial SCX10 Wrangler? Then check out this externally-mounted roll bar rack! It is hand formed and welded from stainless steel and powder coated for durability. Great-looking option!
RC4WD Metal Roof Rack for Axial SCX10 Wrangler
If you have one of the above Roll Bar Racks, you’re going to want to store some items up there, right? Add one of RC4WD’s Metal Roof Racks and create some storage on top of your Wrangler! Made from stainless steel, it is powder coated black to match and attaches right to the Roll Bar Rack!
RC4WD Rear Tube Bed for Trail Finder 2 with Mud Flaps and Lights
Customize your Trail Finder 2 with this cool looking rear tube bed setup. The main cage is made from heavy duty steel tube and powder coated red. Additional parts include a metal tool box, spare tire holder, mud flaps, stainless steel anti-slip panels and lighting. This kit, once completed, bolts right on to your TF2 with the included hardware. Love it!
RC4WD Metal Front Bumper for Axial SCX10 I and II
This heavy duty front bumper is hand-welded from stainless steel and powder coated red. It includes a up-and-over bar to protect your winch or lighting and has stainless steel inserts. Mounts right up to your Axial SCX10 I or II.
Z-L0114 RC4WD Flexfit Embroidered Hat
Z-L0137 RC4WD Embroidered Beanie
Z-G0074 Killer Krawler 2 Axle Ring and Pinion Gears
VVV-C0242 RC4WD Roof Rack for the Defender D110
VVV-C0246 RC4WD Ladder for the Defender D90/D110
VVV-C0251 RC4WD Front Winch Bumper for G2 Cruiser
VVV-C0238 RC4WD Defender Design Steering Guard for Land Rover Defender (Gelande II D90/D110)
VVV-C0239 RC4WD Grid Design Steering Guard for the Land Rover Defender (Gelande II D90/D110)
VVV-C0249 RC4WD 1:10 Tire Holder for Defender D90/D110
VVV-C0247 RC4WD Side Sliders for Defender D110
VVV-C0241 RC4WD Roof Rack with Lights for the Defender D90
VVV-C0250 RC4WD 1:10 Sand Ladder
VVV-C0259 RC4WD Metal Roll Bar Rack for Axial SCX10 Wrangler
VVV-C0261 RC4WD Metal Roof Rack for Axial SCX10 Wrangler
VVV-C0255 RC4WD Rear Tube Bed for Trail Finder 2 with Mud Flaps and Lights
VVV-C0259 RC4WD Metal Front Bumper for Axial SCX10 I and II
For more information, please visit: www.rc4wd.com
