RC4WD Trail Finder 2 RTR Trail Truck with Mojave II Body
Monday , 29 November 2021

RC4WD Trail Finder 2 RTR Trail Truck with Mojave II Body

RC4WD Trail Finder 2 RTR Trail Truck with Mojave II Body

RC4WD’s amazing Trail Finder 2 is now available with the incredibly scale Mojave II body set.

This truck comes loaded with scale features; starting with the chassis rails. They, as well as the sale shock hoops, leaf springs and body mounts, are all machined from billet aluminum. The shocks use are also billet aluminum and feature an internal spring for the ultimate in scale looks. A chassis mounted ‘fuel cell’ is actually a case for your receiver and light controllers.

The TF2 RTR includes RC4WD’s Hammer Transfer Case. It uses 32P gears for strength and sends the power through a R3 single speed transmission. The housing for the trans is cast aluminum for durability and uses a Delrin spur gear and slipper clutch to help protect the internals. Steel universals transfer the power to the wheels, and a beautiful set of wheels they are. White, stamped 1.55″ wheels are strong and look great, and they feature an internal beadlock system so no glue is required. The TF2 RTR rolls on a set of Mud Thrashers molded in a sticky M3 compound.

The electronics in the TF2 RTR are great as well. A RC4AWD Outcry brushed ESC sends power to the 45T, brushed crawler motor. Handling the steering is a RC4WD Twisted Metal Gear digital servo with a torque rating set at a whopping 153oz/in! A XR3b 3-channel 2.4GHz radio system controls the truck.

We saved the best for last – look at that awesome Toyota body! Its really a work of art and includes chrome bumpers, pre-painted grill and headlight reflectors. Wipers, mirrors, marker light details and door handles also add to the scale realism. The drop bed has been painted black and, if you feel inclined, a full light set can be added to the truck.

Other details:
All New Hammer Transfer Case
Ratio: 1.47: 1
Gears: Wide 32P steel gears
Features: 8 bearings, cast casing, hardened gears

All New R3 Single Speed Transmission
Ratios: Pinion/spur 14/64 = 4.57: 1
Internal Ratio: 1.78:1
Gears: Wide steel 32P, Delrin spur, slipper clutch,
Features: Metal billet aluminum casing, scale looking, Motor mount can be rotated to 10 different positions, compatible with other brand spurs (Axial, Traxxas, Robinson)

Cast Yota Axles
Ratio: 15/40 = 2.67: 1
Width at hex (using 4mm TF2 hexes): 176.5mm

All New Trailfinder 2 Chassis
Features: Billet aluminum constriction Adjustable shock hoops

Driveshafts
High quality plastic material, very durable
High quality steel Yokes

Wheels
Name: 1.55 OEM beadlock wheels
Hub: 12mm hex
Width: 22mm
Back spacing: 9mm
Features: Stamped steel, aluminum hub, internal beadlock, very scale looking, 6 bolt pattern,

Bumpers
Tough Armor TF2 Rear Bumper
Tough Armor TF2 Side Sliders

TF2 Truck Dimensions
Wheels base: 287mm (11.3″)
Width: 215mm (8.5″)
Height: 210mm (8.25″)
Ground clearance: 57mm (2.5″)
Final Drive Ratio: 31.93:1

Z-RTR0024 RC4WD Trail Finder 2 RTR Trail Truck with Mojave II Body – $459.99

[source: www.rc4wd.com]

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 25 years. He has raced everything from 1:18th scale trucks to 1:5 scale motorcycles and everything in-between. He's also worked on both sides of the industry fence; working at and with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and has transferred that knowledge to CompetitionX - the most informative RC website on the internet!

Check Also

Video – Tamiya Wild One Blockhead Motors Build Part 3 | CompetitionX

Video – Tamiya Wild One Blockhead Motors Build Part 3 | CompetitionX

Hey everyone and welcome to Part 3 of the Tamiya Wild One Blockhead Motors Edition …

Leave a Reply

Your email address will not be published. Required fields are marked *