Saturday , 14 December 2024

Video: Tamiya XV-02 Pro Build Video – Part 1

Welcome everyone to our Tamiya XV-02 Pro Online Build Video Series.

In this video, Part 1, we start the build process with an intro regarding the tools we suggest you have to make the build extremely enjoyable. We also chat a bit about the manual before we get into the actual build steps – the steering, front and rear differentials and the shock tower supports.

While you can use the kit supplied tools to build the car, we do think a quality set of tools will help you build AND maintain the car. We’ve listed the tools we use below.

Thanks for watching and enjoy the video.

//PRODUCTS USED IN THIS VIDEO
Tamiya XV-02 Pro Rally Kit: https://bit.ly/3tahgqS

//TOOLS USED IN THIS VIDEO
MIP 1.5mm Hex Driver: https://bit.ly/3AkCZOI
MIP 2.0mm Hex Driver: https://bit.ly/2Gb8G5k
ProTek 5.5mm Nut Driver: https://bit.ly/3NQEZ7N
ProTek 7.0mm Nut Driver: https://bit.ly/39oIKlG
MIP Tools 3-Pack (1.5, 2.0, 2.5): https://bit.ly/3noMOqt
ProTek Nut Driver Set (5.0, 5.5, 7.0, 8.0): https://bit.ly/3nqf6Rk
Dynamite Small Phillips Screwdriver: https://bit.ly/3DrhTiO
Excel Hobby Knife: https://bit.ly/3s0q1kn
Tamiya Side Cutters: https://bit.ly/3nxekSR
Tamiya Non-Scratch Pliers: https://bit.ly/3CtgdEv
STRC Shock Pliers: https://bit.ly/2LynD41
Excel Needlenose Pliers: https://bit.ly/2Gk7soA
Maxline Car Stand: https://bit.ly/3qKzxcP
ProTek Curved Scissors: https://bit.ly/2QIa9SD
ProTek Body Reamer: https://bit.ly/3jBhXCd
ProTek Shock Stand: https://bit.ly/2Xysmpv
Pro-Line CA Glue: https://bit.ly/3Bh1OLc
ProTek Thread Lock: https://bit.ly/3pb2v1X
ProTek Calipers: https://bit.ly/3lHx5jd
Parts Tray: https://bit.ly/3qJ2mHt
CompetitionX Ball Cup Tool: https://bit.ly/37Mq4Lr
Cow RC Udder Butter: https://bit.ly/3MRzVyH
Makita DF012DSE Lithium-Ion Cordless Driver: https://amzn.to/3QuHfDs

//RC GEAR WE USE
https://bit.ly/2LB8xuB

//CHECK OUT OUR MERCH
https://bit.ly/3lm0XSq

//MUSIC BY EPIDEMIC SOUND
https://www.epidemicsound.com/referral/m2wc6o/

//SOCIAL STUFF
Facebook: https://www.facebook.com/CompetitionX
Twitter: https://twitter.com/competitionx
Instagram: https://www.instagram.com/competitionxrc/
Pinterest: https://www.pinterest.com/competitionx/

Notice: Some of our articles, videos and descriptions may contain affiliate links, which means that if you click on one of the product links, we may receive a small commission. This helps support the website and social media channels and allows us to continue to produce content. Thank you for the support!

#tamiya​ #xv02pro #rcrallycar​ #competitionx​ #tonyphalen

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 30 years. He has participated in every kind of surface racing events - 1/18 scale trucks, 1/10 scale TC, Rock Racers, Rally - if it had wheels, he's raced it! He's also worked on both sides of the industry fence; collaborating with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and is sharing that knowledge on CompetitionX - the most informative RC website on the internet!

Check Also

HPI Venture 18 Toyota Hilux SR5 Crawler | CompetitionX

HPI Venture 18 Toyota Hilux SR5 Crawler | CompetitionX

HPI Racing is coming in hot with the Venture 18, an all new 1/18 scale …

One comment

  1. Pingback: Video: Tamiya XV-02 Pro Build Video – Part 1 – RC Cars News