Saturday , 28 November 2020
Home » RC Build Blog - Team Associated RC10 Buggy Build » Team Associated RC10 Classic Buggy Build – Part 8 – Body

Team Associated RC10 Classic Buggy Build – Part 8 – Body

Team Associated RC10 Classic Build
Team Associated RC10 Classic Build

The Build – Part 8
The final step in the RC10 build is the body. I decided to have the body painted in Jay Halsey’s World Championship colors…but with a slight 2013 twist. Larry Genova did it up complete with the driver and gave me exactly what I was looking for…again! The car looks great especially with the lights attached.

Build Notes:
It is suggested that you mark the bodymount holes prior to painting. That will make it much easier to mount. Don’t forget to mark the wing mount holes as well.

Team Associated RC10 Classic Build - Step 119
Team Associated RC10 Classic Build – Step 119
The first step of the final step is to cut out the body and attach the lights. A tip: don’t make the holes for the light screws too big. In fact, it’s better if you make a tiny hole and test fit. The screws have a tiny head and if you make the holes to big, the screws will pull through the body. You should also put a tiny drop of threadlock on the screws to help lock them in place.

Team Associated RC10 Classic Build - Step 120
Team Associated RC10 Classic Build – Step 120
A final look at the RC10 Classic. The body and wing have been cut and mounted and the buggy is ready to go! Next step…the test drive!

Thanks for following along the build. If you were lucky enough to get one of these cars, take good care of it…it’s a Classic.

Back to the Team Associated RC10 Classic Build List

About Tony Phalen

Tony Phalen - As an avid RC enthusiast, Tony has been building, bashing and racing RC Cars for over 25 years. He has raced everything from 1:18th scale trucks to 1:5 scale motorcycles and everything in-between. He's also worked on both sides of the industry fence; working at and with many major manufacturers (as well as being a sponsored driver) to working for a high-profile industry magazine. During this time he has learned many tricks, tips and techniques and has transferred that knowledge to CompetitionX - the most informative RC website on the internet!

Check Also

HB Racing E819RS 1/8 Scale Electric Buggy | CompetitionX

HB Racing E819RS 1/8 Scale Electric Buggy | CompetitionX

Back in September we had a quick blurb about HB Racing’s new E819RS 1/18 Scale …

Leave a Reply

Your email address will not be published. Required fields are marked *