In Part 2 of our Tekno RC ET410.2, we built the shocks – yes, that’s it – just the shocks. It was quite the detailed process so, yeah.
Part 3 is a little more involved – the front clip. This includes the steering rack, anti-roll bar, bulkhead and a partial build of the suspension.
The manual wants us to complete part of the front end, then jumping to the rear, however we felt the flow would be better if we just finished off they whole front end. So, yeah, that’s what we did.
Enjoy the build.
//PRODUCTS USED IN THIS VIDEO
Tekno ET410.2 4WD Competition Truggy: https://bit.ly/34UDhyF
Tekno Carbon Fiber Battery Strap: https://bit.ly/2NYluQY
Tekno Carbon Fiber Steering Top Plate: https://bit.ly/3rlC2Ql
Tekno Aluminum Ackermann Plate: https://bit.ly/3tWFN0y
Tekno Carbon Fiber Center Diff Top Plate: https://bit.ly/3lSuELn
Tekno Aluminum Servo Horn (25T): https://bit.ly/31zEp81
Futaba 7PX Radio System: https://bit.ly/3rkeRpU
//TOOLS USED IN THIS VIDEO
MIP 1.5mm Hex Wrench: https://bit.ly/330HjTB
MIP 2.0mm Hex Wrench: https://bit.ly/2Gb8G5k
MIP 2.5mm Hex Wrench: https://bit.ly/3jsxR1M
MIP Tools 3-Pack (1.5, 2.0, 2.5): https://bit.ly/3gQ7t06
ProTek Nut Driver Set (5.0, 5.5, 7.0, 8.0): https://bit.ly/35jDdrj
Excel Needlenose Pliers: https://bit.ly/2Gk7soA
ProTek Curved Scissors: https://bit.ly/2QIa9SD
Excel Hobby Knife: https://bit.ly/3s0q1kn
ProTek Double-Sided Tape: https://bit.ly/2QHb3ix
ProTek Calipers: https://bit.ly/3lHx5jd
Team Associated Black Grease: https://bit.ly/2N3B9xI
ProTek Blue Threadlocking Compound: https://bit.ly/3pb2v1X
STRC Shock Pliers: https://bit.ly/2LynD41
ProTek Shock Stand: https://bit.ly/2Xysmpv
//RC GEAR WE USE
//CHECK OUT OUR MERCH
Notice: Some of our articles, videos and descriptions may contain affiliate links, which means that if you click on one of the product links, we may receive a small commission. This helps support the website and social media channels and allows us to continue to produce content. Thank you for the support!
#tekno #competitiontruggy #eb4102 #competitionx #tonyphalen