What is Anti-Dive?
Anti-Dive (AKA Pro-Squat) describes the angle of the front inner hinge pin. If the pin is angled forward (rear mount higher than the front), the result is Anti-Dive.
You can adjust this setting by either raising the front mount or lowering the rear one.
See also: Anti-Squat, Caster, Kickup
Tuning with Anti-Dive
Flatter Angle
• Decreases Anti-Dive
Steeper Angle
• Adds Anti-Dive
• Increases corner entry steering
• Decreases caster at the front wheels
• Reduces weight transfer to the front end when braking into corners
Back to the RC Suspension Tuning Guide.
